Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR4 SODIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 SODIMM Kit for POSIFLEX XT-7515

SKU CH-F38M-WF81A

DDR4 2666 CL19 16 GB SODIMM kit with two 8 GB modules built for the POSIFLEX XT-7515 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX XT-7515 terminal
  • 16 GB dual-channel kit boosts multitasking
  • DDR4 2666 MHz CL19 low-latency timing
  • 2 V operation reduces power draw
  • 260-pin SODIMM fits factory slot

POSIFLEX XT-7515 SODIMM kit

This 16 GB kit contains two 8 GB DDR4 2666 SODIMM modules built for the POSIFLEX XT-7515 terminal. It targets system integrators and IT teams who need a validated memory upgrade for that specific point-of-sale platform.

DDR4 2666 CL19 limits

The modules run at 2666 MT/s with CL19 latency and 1.20 V, matching the PC4-21300 standard used by the terminal. Bandwidth and timing are fixed by the platform memory controller, so the kit cannot exceed the host's supported data rate or latency settings.

260-pin unbuffered build

Each stick uses a 2Rx8 260-pin layout without a heat spreader, keeping the profile low for the fanless chassis. Major-brand Samsung, Micron or Hynix ICs are used, and the unbuffered non-ECC design means the terminal's memory slots accept the kit directly with no extra configuration.

Privalumai

  • Designed for POSIFLEX XT-7515 terminal
  • 16 GB dual-channel kit boosts multitasking
  • DDR4 2666 MHz CL19 low-latency timing
  • 2 V operation reduces power draw
  • 260-pin SODIMM fits factory slot

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

Klausimai apie šią prekę

Should I pick the 16 GB kit or a different capacity for my POSIFLEX XT-7515?

This kit provides 16 GB as two 8 GB modules, matching the dual-channel layout the XT-7515 expects for best throughput.

What does the 2666 MT/s rating actually deliver inside the terminal?

The memory runs at DDR4 2666 (PC4-21300) with CL19 timing, giving the bandwidth the POS system's chipset is designed to use.

Will the 260-pin SODIMM interface fit and what speed ceiling does it impose?

Yes — the 260-pin DDR4 SODIMM form factor is the exact slot type in the XT-7515, and the interface caps transfer rate at the module's rated 2666 MT/s.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.