We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 SODIMM Kit for POSIFLEX XT-7515

SKU CH-F38M-WF81A

DDR4 2666 CL19 16 GB SODIMM kit with two 8 GB modules built for the POSIFLEX XT-7515 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX XT-7515 terminal
  • 16 GB dual-channel kit boosts multitasking
  • DDR4 2666 MHz CL19 low-latency timing
  • 2 V operation reduces power draw
  • 260-pin SODIMM fits factory slot

POSIFLEX XT-7515 SODIMM kit

This 16 GB kit contains two 8 GB DDR4 2666 SODIMM modules built for the POSIFLEX XT-7515 terminal. It targets system integrators and IT teams who need a validated memory upgrade for that specific point-of-sale platform.

DDR4 2666 CL19 limits

The modules run at 2666 MT/s with CL19 latency and 1.20 V, matching the PC4-21300 standard used by the terminal. Bandwidth and timing are fixed by the platform memory controller, so the kit cannot exceed the host's supported data rate or latency settings.

260-pin unbuffered build

Each stick uses a 2Rx8 260-pin layout without a heat spreader, keeping the profile low for the fanless chassis. Major-brand Samsung, Micron or Hynix ICs are used, and the unbuffered non-ECC design means the terminal's memory slots accept the kit directly with no extra configuration.

Highlights

  • Designed for POSIFLEX XT-7515 terminal
  • 16 GB dual-channel kit boosts multitasking
  • DDR4 2666 MHz CL19 low-latency timing
  • 2 V operation reduces power draw
  • 260-pin SODIMM fits factory slot

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Should I pick the 16 GB kit or a different capacity for my POSIFLEX XT-7515?

This kit provides 16 GB as two 8 GB modules, matching the dual-channel layout the XT-7515 expects for best throughput.

What does the 2666 MT/s rating actually deliver inside the terminal?

The memory runs at DDR4 2666 (PC4-21300) with CL19 timing, giving the bandwidth the POS system's chipset is designed to use.

Will the 260-pin SODIMM interface fit and what speed ceiling does it impose?

Yes — the 260-pin DDR4 SODIMM form factor is the exact slot type in the XT-7515, and the interface caps transfer rate at the module's rated 2666 MT/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.