BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278954BTC
Skladom
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 SODIMM Kit for POSIFLEX XT-7515
DDR4 2666 CL19 16 GB SODIMM kit with two 8 GB modules built for the POSIFLEX XT-7515 terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Designed for POSIFLEX XT-7515 terminal
- 16 GB dual-channel kit boosts multitasking
- DDR4 2666 MHz CL19 low-latency timing
- 2 V operation reduces power draw
- 260-pin SODIMM fits factory slot
POSIFLEX XT-7515 SODIMM kit
This 16 GB kit contains two 8 GB DDR4 2666 SODIMM modules built for the POSIFLEX XT-7515 terminal. It targets system integrators and IT teams who need a validated memory upgrade for that specific point-of-sale platform.
DDR4 2666 CL19 limits
The modules run at 2666 MT/s with CL19 latency and 1.20 V, matching the PC4-21300 standard used by the terminal. Bandwidth and timing are fixed by the platform memory controller, so the kit cannot exceed the host's supported data rate or latency settings.
260-pin unbuffered build
Each stick uses a 2Rx8 260-pin layout without a heat spreader, keeping the profile low for the fanless chassis. Major-brand Samsung, Micron or Hynix ICs are used, and the unbuffered non-ECC design means the terminal's memory slots accept the kit directly with no extra configuration.
Prednosti
- Designed for POSIFLEX XT-7515 terminal
- 16 GB dual-channel kit boosts multitasking
- DDR4 2666 MHz CL19 low-latency timing
- 2 V operation reduces power draw
- 260-pin SODIMM fits factory slot
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
Should I pick the 16 GB kit or a different capacity for my POSIFLEX XT-7515?
This kit provides 16 GB as two 8 GB modules, matching the dual-channel layout the XT-7515 expects for best throughput.
What does the 2666 MT/s rating actually deliver inside the terminal?
The memory runs at DDR4 2666 (PC4-21300) with CL19 timing, giving the bandwidth the POS system's chipset is designed to use.
Will the 260-pin SODIMM interface fit and what speed ceiling does it impose?
Yes — the 260-pin DDR4 SODIMM form factor is the exact slot type in the XT-7515, and the interface caps transfer rate at the module's rated 2666 MT/s.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
