Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four green DDR4 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 1TB (4x256GB) DDR4 3200 CL22 8Rx4 ECC Registered RDIMM memory upgrade

SKU CH-C46Z-NG6C9

A 1 TB server memory kit with four 256 GB DDR4 3200 CL22 registered ECC RDIMMs for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards

  • Capacity1TB (4 x 256GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 1TB 4X256GB

  • 1TB capacity in a matched 4 × 256 GB kit for maximum server density
  • DDR4 3200 MT/s speed with CL22 latency runs at rated throughput
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 8Rx4 organisation and 1.2 V operation match the motherboard memory-controller requirements
  • 288-pin form factor validated for Supermicro X12DPL-NT6 and X12DPL-i6 boards

1TB DDR4-3200 8Rx4 Registered ECC Kit

This 1TB kit contains four 256GB DDR4-3200 (PC4-25600) Registered ECC RDIMMs rated CL22 at 1.20V. The modules use a 288-pin form factor and an 8Rx4 organisation built with major-brand Samsung, Micron or Hynix DRAM. They are qualified for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards that require registered memory.

Suited for servers needing maximum registered

This kit suits administrators populating every slot of a compatible Supermicro X12DPL board with the highest-density registered ECC modules the platform accepts. It is not for systems that only accept unbuffered UDIMMs, SODIMM form factors, lower-density ranks, or speeds other than DDR4-3200.

8Rx4 rank organisation decides compatibility

The 8Rx4 rank structure is the single specification the memory controller checks before recognising each 256GB module at full capacity. If the motherboard's qualified-vendor list does not explicitly approve 8Rx4 Registered DIMMs, the system will not boot or will see reduced capacity.

Privalumai

  • 1TB capacity in a matched 4 × 256 GB kit for maximum server density
  • DDR4 3200 MT/s speed with CL22 latency runs at rated throughput
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 8Rx4 organisation and 1.2 V operation match the motherboard memory-controller requirements
  • 288-pin form factor validated for Supermicro X12DPL-NT6 and X12DPL-i6 boards

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-2584K4
Capacity1TB (4 x 256GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content1TB 4X256GB DDR4 3200MHz PC4-25600 8Rx4 1.2V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What motherboard and CPU combination must I already have for this 1TB DDR4-3200 8Rx4 RDIMM kit to be recognised at full capacity?

This kit is verified for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards running DDR4 3200 PC4-25600; the board must support 288-pin registered ECC modules and 8Rx4 population rules.

If I keep older DDR4 RDIMMs in the same server, will this 8Rx4 1.2 V CL22 kit run alongside them without down-clocking?

Mixing ranks or speeds forces the memory controller to run all slots at the lowest common speed and timing; for stable full-speed operation populate every channel with identical 8Rx4 modules.

After installation, how can I confirm the server sees all 1 TB at DDR4 3200 CL22 with ECC active?

Check the BIOS memory information screen or run dmidecode — it should report four 256 GB DDR4 3200 registered ECC DIMMs at 1.2 V, CAS 22, total 1 TB.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.