Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR4 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 1TB (4x256GB) DDR4 3200 CL22 8Rx4 ECC Registered RDIMM memory upgrade

SKU CH-C46Z-NG6C9

A 1 TB server memory kit with four 256 GB DDR4 3200 CL22 registered ECC RDIMMs for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards

  • Capacity1TB (4 x 256GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 1TB 4X256GB

  • 1TB capacity in a matched 4 × 256 GB kit for maximum server density
  • DDR4 3200 MT/s speed with CL22 latency runs at rated throughput
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 8Rx4 organisation and 1.2 V operation match the motherboard memory-controller requirements
  • 288-pin form factor validated for Supermicro X12DPL-NT6 and X12DPL-i6 boards

1TB DDR4-3200 8Rx4 Registered ECC Kit

This 1TB kit contains four 256GB DDR4-3200 (PC4-25600) Registered ECC RDIMMs rated CL22 at 1.20V. The modules use a 288-pin form factor and an 8Rx4 organisation built with major-brand Samsung, Micron or Hynix DRAM. They are qualified for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards that require registered memory.

Suited for servers needing maximum registered

This kit suits administrators populating every slot of a compatible Supermicro X12DPL board with the highest-density registered ECC modules the platform accepts. It is not for systems that only accept unbuffered UDIMMs, SODIMM form factors, lower-density ranks, or speeds other than DDR4-3200.

8Rx4 rank organisation decides compatibility

The 8Rx4 rank structure is the single specification the memory controller checks before recognising each 256GB module at full capacity. If the motherboard's qualified-vendor list does not explicitly approve 8Rx4 Registered DIMMs, the system will not boot or will see reduced capacity.

Priekšrocības

  • 1TB capacity in a matched 4 × 256 GB kit for maximum server density
  • DDR4 3200 MT/s speed with CL22 latency runs at rated throughput
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 8Rx4 organisation and 1.2 V operation match the motherboard memory-controller requirements
  • 288-pin form factor validated for Supermicro X12DPL-NT6 and X12DPL-i6 boards

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-2584K4
Capacity1TB (4 x 256GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content1TB 4X256GB DDR4 3200MHz PC4-25600 8Rx4 1.2V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What motherboard and CPU combination must I already have for this 1TB DDR4-3200 8Rx4 RDIMM kit to be recognised at full capacity?

This kit is verified for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards running DDR4 3200 PC4-25600; the board must support 288-pin registered ECC modules and 8Rx4 population rules.

If I keep older DDR4 RDIMMs in the same server, will this 8Rx4 1.2 V CL22 kit run alongside them without down-clocking?

Mixing ranks or speeds forces the memory controller to run all slots at the lowest common speed and timing; for stable full-speed operation populate every channel with identical 8Rx4 modules.

After installation, how can I confirm the server sees all 1 TB at DDR4 3200 CL22 with ECC active?

Check the BIOS memory information screen or run dmidecode — it should report four 256 GB DDR4 3200 registered ECC DIMMs at 1.2 V, CAS 22, total 1 TB.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.