Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR5 UDIMM sticks in a clear plastic clamshell

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR5 4800 CL40 UDIMM memory upgrade

SKU CH-C2ZK-JVVGW

A 32 GB dual-channel DDR5 kit with two 16 GB modules at 4800 MT/s, CL40, 1.10 V for compatible Thinkmate workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB kit with two 16 GB modules for expanded capacity
  • DDR5 4800 speed rated at PC5-38400 for responsive throughput
  • CL40 latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor fits compatible desktop motherboards
  • 1Rx8 single-rank layout using major OEM DRAM chips

32 GB DDR5 4800 kit for Thinkmate workstations

This NEMIX RAM kit supplies 32 GB of DDR5 memory in a matched pair of 16 GB modules. It runs at 4800 MHz with CL40 latency at 1.1 V and uses 288-pin unbuffered UDIMM form factor. The kit is validated for Thinkmate SB Grid-Standard workstations.

For Thinkmate owners needing 32 GB of DDR5

Builders upgrading a compatible Thinkmate workstation will find this kit fits the qualified parts list. Systems that require ECC or registered modules cannot use this non-ECC unbuffered kit. Buyers who need more than 32 GB should look at higher-capacity options.

288-pin DDR5 UDIMM at 4800 MHz

The single specification that decides fit is the 288-pin DDR5 UDIMM interface running at 4800 MHz with CL40 timing. Only motherboards that accept DDR5 unbuffered memory at this speed and pin count will recognise the modules.

Privalumai

  • 32 GB kit with two 16 GB modules for expanded capacity
  • DDR5 4800 speed rated at PC5-38400 for responsive throughput
  • CL40 latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor fits compatible desktop motherboards
  • 1Rx8 single-rank layout using major OEM DRAM chips

Specifikacijos

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Klausimai apie šią prekę

Does my workstation need DDR5 288-pin UDIMM slots to use this 32 GB kit?

Yes, the kit is built as 288-pin DDR5 UDIMM modules and only fits motherboards with DDR5 UDIMM slots.

Will these 1.1 V modules run on a board that only supports 1.2 V DDR5?

The modules operate at 1.10 V, so a motherboard limited to 1.2 V may not supply the correct voltage and could prevent boot.

How can I confirm the kit is running at 4800 MT/s with CL40 after install?

Check the memory speed and latency in BIOS or a tool such as CPU-Z; they should show 4800 MT/s and CAS latency 40.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.