We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM sticks in a clear plastic clamshell

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR5 4800 CL40 UDIMM memory upgrade

SKU CH-C2ZK-JVVGW

A 32 GB dual-channel DDR5 kit with two 16 GB modules at 4800 MT/s, CL40, 1.10 V for compatible Thinkmate workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB kit with two 16 GB modules for expanded capacity
  • DDR5 4800 speed rated at PC5-38400 for responsive throughput
  • CL40 latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor fits compatible desktop motherboards
  • 1Rx8 single-rank layout using major OEM DRAM chips

32 GB DDR5 4800 kit for Thinkmate workstations

This NEMIX RAM kit supplies 32 GB of DDR5 memory in a matched pair of 16 GB modules. It runs at 4800 MHz with CL40 latency at 1.1 V and uses 288-pin unbuffered UDIMM form factor. The kit is validated for Thinkmate SB Grid-Standard workstations.

For Thinkmate owners needing 32 GB of DDR5

Builders upgrading a compatible Thinkmate workstation will find this kit fits the qualified parts list. Systems that require ECC or registered modules cannot use this non-ECC unbuffered kit. Buyers who need more than 32 GB should look at higher-capacity options.

288-pin DDR5 UDIMM at 4800 MHz

The single specification that decides fit is the 288-pin DDR5 UDIMM interface running at 4800 MHz with CL40 timing. Only motherboards that accept DDR5 unbuffered memory at this speed and pin count will recognise the modules.

Highlights

  • 32 GB kit with two 16 GB modules for expanded capacity
  • DDR5 4800 speed rated at PC5-38400 for responsive throughput
  • CL40 latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor fits compatible desktop motherboards
  • 1Rx8 single-rank layout using major OEM DRAM chips

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Does my workstation need DDR5 288-pin UDIMM slots to use this 32 GB kit?

Yes, the kit is built as 288-pin DDR5 UDIMM modules and only fits motherboards with DDR5 UDIMM slots.

Will these 1.1 V modules run on a board that only supports 1.2 V DDR5?

The modules operate at 1.10 V, so a motherboard limited to 1.2 V may not supply the correct voltage and could prevent boot.

How can I confirm the kit is running at 4800 MT/s with CL40 after install?

Check the memory speed and latency in BIOS or a tool such as CPU-Z; they should show 4800 MT/s and CAS latency 40.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.