SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501426BTC
Stokta
NEMIX RAM
NEMIX RAM 32GB (2×16GB) DDR5 4800 CL40 UDIMM memory upgrade
A 32 GB dual-channel DDR5 kit with two 16 GB modules at 4800 MT/s, CL40, 1.10 V for compatible Thinkmate workstations
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit with two 16 GB modules for expanded capacity
- DDR5 4800 speed rated at PC5-38400 for responsive throughput
- CL40 latency at 1.10 V for efficient operation
- 288-pin UDIMM form factor fits compatible desktop motherboards
- 1Rx8 single-rank layout using major OEM DRAM chips
32 GB DDR5 4800 kit for Thinkmate workstations
This NEMIX RAM kit supplies 32 GB of DDR5 memory in a matched pair of 16 GB modules. It runs at 4800 MHz with CL40 latency at 1.1 V and uses 288-pin unbuffered UDIMM form factor. The kit is validated for Thinkmate SB Grid-Standard workstations.
For Thinkmate owners needing 32 GB of DDR5
Builders upgrading a compatible Thinkmate workstation will find this kit fits the qualified parts list. Systems that require ECC or registered modules cannot use this non-ECC unbuffered kit. Buyers who need more than 32 GB should look at higher-capacity options.
288-pin DDR5 UDIMM at 4800 MHz
The single specification that decides fit is the 288-pin DDR5 UDIMM interface running at 4800 MHz with CL40 timing. Only motherboards that accept DDR5 unbuffered memory at this speed and pin count will recognise the modules.
Öne çıkanlar
- 32 GB kit with two 16 GB modules for expanded capacity
- DDR5 4800 speed rated at PC5-38400 for responsive throughput
- CL40 latency at 1.10 V for efficient operation
- 288-pin UDIMM form factor fits compatible desktop motherboards
- 1Rx8 single-rank layout using major OEM DRAM chips
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Bu ürünle ilgili sorular
Does my workstation need DDR5 288-pin UDIMM slots to use this 32 GB kit?
Yes, the kit is built as 288-pin DDR5 UDIMM modules and only fits motherboards with DDR5 UDIMM slots.
Will these 1.1 V modules run on a board that only supports 1.2 V DDR5?
The modules operate at 1.10 V, so a motherboard limited to 1.2 V may not supply the correct voltage and could prevent boot.
How can I confirm the kit is running at 4800 MT/s with CL40 after install?
Check the memory speed and latency in BIOS or a tool such as CPU-Z; they should show 4800 MT/s and CAS latency 40.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
