Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1Rx8 ECC Registered RDIMM memory upgrade for GIGABYTE MZ33-AR1

SKU CH-9J1S-7FBC7

64GB DDR5-4800 ECC Registered RDIMM kit (4×16GB, CL40, 1.1V) validated for the GIGABYTE MZ33-AR1 motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Rodyti 18 daugiau konfigūracijų
  • 64 GB capacity from four 16 GB modules supports heavy server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 1Rx8 rank matches the motherboard memory controller exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-AR1 without adapters

Exact-match upgrade kit

This 64 GB kit contains four 16 GB DDR5 RDIMMs rated at 4800 MT/s with CL40 latency and 1.1 V operation. The modules are registered and ECC-enabled, matching the memory controller expectations of the GIGABYTE MZ33-AR1 motherboard. Each stick uses a 1Rx8 organisation and a 288-pin form factor. The kit is new and ready for installation.

Registered ECC architecture

The registered design buffers address and command signals so the memory controller can drive all four slots at full population without signal degradation. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. This combination is required by the target platform for stable operation at rated speed.

Four-module population kit

The package delivers exactly four matched RDIMMs, allowing you to fill the board's supported channels in a single step. No heat spreaders are included, so airflow clearance follows the motherboard's standard DIMM spacing rules. Verify the manual for approved population order before installing to ensure the system recognises the full 64 GB capacity.

Privalumai

  • 64 GB capacity from four 16 GB modules supports heavy server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 1Rx8 rank matches the motherboard memory controller exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-AR1 without adapters

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What does the 4800 MT/s rating mean once the kit is installed in a GIGABYTE MZ33-AR1?

The memory controller will run all four 16 GB modules at DDR5-4800 (PC5-38400) with CL40 timing at 1.10 V, delivering the full 64 GB capacity at rated speed.

How does the registered ECC RDIMM interface affect operation on this motherboard?

The 288-pin registered design buffers address and command signals, letting the board run a fully populated 4-slot configuration at DDR5-4800 while ECC corrects single-bit errors on the fly.

What physical slot and clearance requirements does this 4-module kit have?

Each module is a standard 288-pin DDR5 RDIMM with no heat spreader, so it fits the four DIMM slots on the MZ33-AR1 following the board's population order.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.