Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with gold edge connector and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-AMVE-6F7AS

96GB DDR5 4800 ECC registered RDIMM validated for GIGABYTE MZ33-CP1 servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

Rodyti 18 daugiau konfigūracijų
  • 96 GB capacity lets you run larger workloads in memory
  • DDR5 4800 speed with CL40 latency delivers rated throughput for the platform
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots

Exact-match DDR5 server upgrade

This 96GB DDR5-4800 RDIMM kit is built for the GIGABYTE MZ33-CP1 motherboard. It delivers registered ECC memory at 1.1V with CL40 latency in a 2Rx4 configuration. The 288-pin modules match the board's required form factor and population rules.

Suited for fully populated enterprise servers

It fits administrators who need every slot filled at rated speed with error correction active. Builders using consumer boards, unbuffered DIMMs, or non-ECC memory should look elsewhere. Systems that cannot accept registered modules or that require different voltages are not compatible.

Steady under sustained enterprise loads

Registered buffering reduces electrical load on the memory controller so all channels remain stable when fully populated. ECC corrects single-bit errors continuously during long compute runs. The 1.1V operation keeps power draw consistent across extended uptime.

Privalumai

  • 96 GB capacity lets you run larger workloads in memory
  • DDR5 4800 speed with CL40 latency delivers rated throughput for the platform
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does the GIGABYTE MZ33-CP1 motherboard require registered ECC RDIMMs for this 96GB DDR5 4800 CL40 kit to function?

Yes, the MZ33-CP1 requires 288-pin registered ECC RDIMMs; this kit matches that exact form factor, voltage (1.1V), rank (2Rx4) and timing (CL40) so the memory controller recognises it at full 96GB capacity and rated 4800 MT/s speed.

Can I mix this 2Rx4 registered ECC DDR5 module with older unbuffered non-ECC DDR5 DIMMs in the same server?

No, registered and unbuffered architectures cannot operate together on the same channel; the MZ33-CP1 memory controller expects registered ECC RDIMMs in every populated slot, so mixing would prevent boot or cause instability.

How can I verify the kit is running at DDR5 4800 with CL40 timings after installation?

Enter the BIOS or use a tool like CPU-Z to confirm the memory frequency reads 4800 MT/s (PC5-38400) and the CAS latency shows CL40; the registered ECC status should also be reported as active.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.