Wir akzeptieren Kryptowährungen — so können die Coins, die Sie besitzen, echte Hardware kaufen.Zahlen Sie mit Krypto, geben Sie sie für echte Hardware aus. Weltweit kostenloser versicherter Versand ab 399 $. Neutrale Kartons ohne Markenaufdruck, versendet aus Deutschland.Kostenloser versicherter Versand ab 399 $. Ihr Kurs wird 30 Minuten lang gesperrt, sobald die Kasse geöffnet wird.Kurs 30 Minuten gesperrt. Jeder Artikel ist versiegelt, die Seriennummer wird geprüft, und es gilt eine Garantie von 24 Monaten.Versiegelt, 24 Monate Garantie.

Gemerkte Artikel Anmelden
Green rectangular circuit board with gold edge connector and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-AMVE-6F7AS

96GB DDR5 4800 ECC registered RDIMM validated for GIGABYTE MZ33-CP1 servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

18 weitere Konfigurationen anzeigen
  • 96 GB capacity lets you run larger workloads in memory
  • DDR5 4800 speed with CL40 latency delivers rated throughput for the platform
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots

Exact-match DDR5 server upgrade

This 96GB DDR5-4800 RDIMM kit is built for the GIGABYTE MZ33-CP1 motherboard. It delivers registered ECC memory at 1.1V with CL40 latency in a 2Rx4 configuration. The 288-pin modules match the board's required form factor and population rules.

Suited for fully populated enterprise servers

It fits administrators who need every slot filled at rated speed with error correction active. Builders using consumer boards, unbuffered DIMMs, or non-ECC memory should look elsewhere. Systems that cannot accept registered modules or that require different voltages are not compatible.

Steady under sustained enterprise loads

Registered buffering reduces electrical load on the memory controller so all channels remain stable when fully populated. ECC corrects single-bit errors continuously during long compute runs. The 1.1V operation keeps power draw consistent across extended uptime.

Besonderheiten

  • 96 GB capacity lets you run larger workloads in memory
  • DDR5 4800 speed with CL40 latency delivers rated throughput for the platform
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots

Technische Daten

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere Versionen dieses Modells

5 weitere aus dieser Serie

Gleiche Familie, unterschiedlicher Speicher, Kühler oder Takt — vergleichen Sie, bevor Sie sich entscheiden.

Fragen zu diesem Artikel

Does the GIGABYTE MZ33-CP1 motherboard require registered ECC RDIMMs for this 96GB DDR5 4800 CL40 kit to function?

Yes, the MZ33-CP1 requires 288-pin registered ECC RDIMMs; this kit matches that exact form factor, voltage (1.1V), rank (2Rx4) and timing (CL40) so the memory controller recognises it at full 96GB capacity and rated 4800 MT/s speed.

Can I mix this 2Rx4 registered ECC DDR5 module with older unbuffered non-ECC DDR5 DIMMs in the same server?

No, registered and unbuffered architectures cannot operate together on the same channel; the MZ33-CP1 memory controller expects registered ECC RDIMMs in every populated slot, so mixing would prevent boot or cause instability.

How can I verify the kit is running at DDR5 4800 with CL40 timings after installation?

Enter the BIOS or use a tool like CPU-Z to confirm the memory frequency reads 4800 MT/s (PC5-38400) and the CAS latency shows CL40; the registered ECC status should also be reported as active.

Ebenfalls in dieser Kategorie

Kunden haben diese ebenfalls verglichen

Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.