NEMIX RAM
NEMIX RAM DDR5 6400 CL52 576GB (6×96GB) 1.1V ECC RDIMM Supermicro SYS-122HA-TN-LCC
576 GB DDR5 ECC RDIMM kit with six 96 GB modules running at 6400 MHz CL52 and 1.1 V for Supermicro SYS-122HA-TN-LCC
- Capacity576GB (6 x 96GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 576 GB total capacity across six 96 GB modules
- ECC RDIMM registered design protects data integrity
- 6400 MHz DDR5 speed with CL52 latency
- 1 V operating voltage reduces power draw
- Validated for Supermicro SYS-122HA-TN-LCC servers
576GB DDR5 ECC RDIMM kit for Supermicro
This 576GB kit contains six 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V CL52 288-pin ECC RDIMM modules. It is built for the Supermicro Hyper SuperServer SYS-122HA-TN-LCC and targets servers or workstations that require registered ECC memory at this capacity and speed.
Installation notes and common issues
The modules are 288-pin DDR5 RDIMMs that seat in the server's DIMM slots; installation typically takes minutes when following the system manual. Because each module is a 2Rx4 registered ECC part, the platform must support registered memory and the correct population order; mixing with unbuffered or non-ECC DIMMs will prevent boot.
DDR5 RDIMM practical limits
DDR5 RDIMMs operate at 1.1V and use on-die ECC with a registered clock driver that adds one cycle of latency compared with unbuffered modules. The registered buffer improves signal integrity at high capacity but limits maximum frequency scaling; the kit runs at 6400MHz CL52 within the JEDEC PC5-51200 standard. Systems that do not support registered ECC DDR5 cannot use these modules.
Privalumai
- 576 GB total capacity across six 96 GB modules
- ECC RDIMM registered design protects data integrity
- 6400 MHz DDR5 speed with CL52 latency
- 1 V operating voltage reduces power draw
- Validated for Supermicro SYS-122HA-TN-LCC servers
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB (6 x 96GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
How do I confirm the 6400MHz CL52 ECC RDIMM kit is running correctly after installing it in my SYS-122HA-TN-LCC?
Enter the server BIOS or UEFI and verify the memory frequency shows 6400MT/s, CAS latency reads CL52, voltage is set to 1.1V and the ECC status reports enabled across all six 96GB modules.
What ships in the MR51200-9624K6 package and what extra items are required?
The box contains six 96GB DDR5 288-pin ECC RDIMM modules totalling 576GB; no heat spreaders, cables or tools are included and nothing else must be purchased for a standard installation.
Which NEMIX RAM DDR5 kit should I choose for the Supermicro SYS-122HA-TN-LCC if I need maximum registered ECC capacity?
Select the MR51200-9624K6 576GB (6×96GB) DDR5 6400 CL52 1.1V 2Rx4 RDIMM kit, as it matches the server’s validated memory specification exactly.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



