NEMIX RAM
NEMIX RAM DDR5 6400 CL52 576GB (6×96GB) 1.1V ECC RDIMM Supermicro SYS-122HA-TN-LCC
576 GB DDR5 ECC RDIMM kit with six 96 GB modules running at 6400 MHz CL52 and 1.1 V for Supermicro SYS-122HA-TN-LCC
- Capacity576GB (6 x 96GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 576 GB total capacity across six 96 GB modules
- ECC RDIMM registered design protects data integrity
- 6400 MHz DDR5 speed with CL52 latency
- 1 V operating voltage reduces power draw
- Validated for Supermicro SYS-122HA-TN-LCC servers
576GB DDR5 ECC RDIMM kit for Supermicro
This 576GB kit contains six 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V CL52 288-pin ECC RDIMM modules. It is built for the Supermicro Hyper SuperServer SYS-122HA-TN-LCC and targets servers or workstations that require registered ECC memory at this capacity and speed.
Installation notes and common issues
The modules are 288-pin DDR5 RDIMMs that seat in the server's DIMM slots; installation typically takes minutes when following the system manual. Because each module is a 2Rx4 registered ECC part, the platform must support registered memory and the correct population order; mixing with unbuffered or non-ECC DIMMs will prevent boot.
DDR5 RDIMM practical limits
DDR5 RDIMMs operate at 1.1V and use on-die ECC with a registered clock driver that adds one cycle of latency compared with unbuffered modules. The registered buffer improves signal integrity at high capacity but limits maximum frequency scaling; the kit runs at 6400MHz CL52 within the JEDEC PC5-51200 standard. Systems that do not support registered ECC DDR5 cannot use these modules.
Pluspunten
- 576 GB total capacity across six 96 GB modules
- ECC RDIMM registered design protects data integrity
- 6400 MHz DDR5 speed with CL52 latency
- 1 V operating voltage reduces power draw
- Validated for Supermicro SYS-122HA-TN-LCC servers
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB (6 x 96GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vragen over dit artikel
How do I confirm the 6400MHz CL52 ECC RDIMM kit is running correctly after installing it in my SYS-122HA-TN-LCC?
Enter the server BIOS or UEFI and verify the memory frequency shows 6400MT/s, CAS latency reads CL52, voltage is set to 1.1V and the ECC status reports enabled across all six 96GB modules.
What ships in the MR51200-9624K6 package and what extra items are required?
The box contains six 96GB DDR5 288-pin ECC RDIMM modules totalling 576GB; no heat spreaders, cables or tools are included and nothing else must be purchased for a standard installation.
Which NEMIX RAM DDR5 kit should I choose for the Supermicro SYS-122HA-TN-LCC if I need maximum registered ECC capacity?
Select the MR51200-9624K6 576GB (6×96GB) DDR5 6400 CL52 1.1V 2Rx4 RDIMM kit, as it matches the server’s validated memory specification exactly.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.



