暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 6400 CL52 576GB (6×96GB) 1.1V ECC RDIMM Supermicro SYS-122HA-TN-LCC

SKU CH-8C3H-5XYW3

576 GB DDR5 ECC RDIMM kit with six 96 GB modules running at 6400 MHz CL52 and 1.1 V for Supermicro SYS-122HA-TN-LCC

  • Capacity576GB (6 x 96GB)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Compatible SystemSupermicro
  • 576 GB total capacity across six 96 GB modules
  • ECC RDIMM registered design protects data integrity
  • 6400 MHz DDR5 speed with CL52 latency
  • 1 V operating voltage reduces power draw
  • Validated for Supermicro SYS-122HA-TN-LCC servers

576GB DDR5 ECC RDIMM kit for Supermicro

This 576GB kit contains six 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V CL52 288-pin ECC RDIMM modules. It is built for the Supermicro Hyper SuperServer SYS-122HA-TN-LCC and targets servers or workstations that require registered ECC memory at this capacity and speed.

Installation notes and common issues

The modules are 288-pin DDR5 RDIMMs that seat in the server's DIMM slots; installation typically takes minutes when following the system manual. Because each module is a 2Rx4 registered ECC part, the platform must support registered memory and the correct population order; mixing with unbuffered or non-ECC DIMMs will prevent boot.

DDR5 RDIMM practical limits

DDR5 RDIMMs operate at 1.1V and use on-die ECC with a registered clock driver that adds one cycle of latency compared with unbuffered modules. The registered buffer improves signal integrity at high capacity but limits maximum frequency scaling; the kit runs at 6400MHz CL52 within the JEDEC PC5-51200 standard. Systems that do not support registered ECC DDR5 cannot use these modules.

特長

  • 576 GB total capacity across six 96 GB modules
  • ECC RDIMM registered design protects data integrity
  • 6400 MHz DDR5 speed with CL52 latency
  • 1 V operating voltage reduces power draw
  • Validated for Supermicro SYS-122HA-TN-LCC servers

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K6
Capacity576GB (6 x 96GB)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB (6 x 96GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

How do I confirm the 6400MHz CL52 ECC RDIMM kit is running correctly after installing it in my SYS-122HA-TN-LCC?

Enter the server BIOS or UEFI and verify the memory frequency shows 6400MT/s, CAS latency reads CL52, voltage is set to 1.1V and the ECC status reports enabled across all six 96GB modules.

What ships in the MR51200-9624K6 package and what extra items are required?

The box contains six 96GB DDR5 288-pin ECC RDIMM modules totalling 576GB; no heat spreaders, cables or tools are included and nothing else must be purchased for a standard installation.

Which NEMIX RAM DDR5 kit should I choose for the Supermicro SYS-122HA-TN-LCC if I need maximum registered ECC capacity?

Select the MR51200-9624K6 576GB (6×96GB) DDR5 6400 CL52 1.1V 2Rx4 RDIMM kit, as it matches the server’s validated memory specification exactly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。