Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 384GB 4x96GB 5600MHz CL46 1.1V 2Rx4 Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-TDYG-G4J33

384 GB DDR5 ECC registered server memory kit in four 96 GB modules at 5600 MHz CL46 1.1 V 2Rx4 for Supermicro X14SDW-40C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB capacity in a 4 × 96 GB kit for dense server workloads
  • DDR5 5600 MHz PC5-44800 speed with CL46 latency for responsive data access
  • Registered ECC RDIMM architecture corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in fully populated slots
  • 288-pin 2Rx4 modules validated for Supermicro X14SDW-40C-SP9F motherboard compatibility

384GB DDR5 ECC RDIMM kit

This 384GB kit contains four 96GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro X14SDW-40C-SP9F motherboard. It delivers 288-pin DDR5 memory with CL46 latency at 1.10V for server workloads that require high capacity and error correction.

Critical spec: 2Rx4 Registered ECC at DDR5-5600

The memory controller expects exactly 2Rx4 Registered ECC modules at DDR5-5600 (PC5-44800) with 1.10V operation; any other rank, voltage, or buffering type will prevent the system from recognizing the full 384GB at rated speed.

For Supermicro X14SDW-40C-SP9F upgrades only

Suitable for administrators populating all four slots on this specific board with validated 96GB RDIMMs; not for builds needing UDIMM, SODIMM, non-ECC, or lower-capacity modules that the board's population rules do not support.

Privalumai

  • 384 GB capacity in a 4 × 96 GB kit for dense server workloads
  • DDR5 5600 MHz PC5-44800 speed with CL46 latency for responsive data access
  • Registered ECC RDIMM architecture corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in fully populated slots
  • 288-pin 2Rx4 modules validated for Supermicro X14SDW-40C-SP9F motherboard compatibility

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the DDR5-5600 speed run at full 5600MHz on the Supermicro X14SDW-40C-SP9F?

Yes, the kit is spec-matched to the board's DDR5-5600 memory controller so all four slots operate at the rated 5600MHz when populated per the manual.

Does the PC5-44800 rating limit bandwidth on this motherboard?

PC5-44800 is the JEDEC peak transfer rate for DDR5-5600; the X14SDW-40C-SP9F's controller supports that ceiling natively.

Do the 288-pin RDIMMs fit the X14SDW-40C-SP9F DIMM slots without adapters?

The board uses standard DDR5 RDIMM sockets; the 288-pin modules seat directly following the population order in the system manual.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.