Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 384GB 4x96GB 5600MHz CL46 1.1V 2Rx4 Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-TDYG-G4J33

384 GB DDR5 ECC registered server memory kit in four 96 GB modules at 5600 MHz CL46 1.1 V 2Rx4 for Supermicro X14SDW-40C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB capacity in a 4 × 96 GB kit for dense server workloads
  • DDR5 5600 MHz PC5-44800 speed with CL46 latency for responsive data access
  • Registered ECC RDIMM architecture corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in fully populated slots
  • 288-pin 2Rx4 modules validated for Supermicro X14SDW-40C-SP9F motherboard compatibility

384GB DDR5 ECC RDIMM kit

This 384GB kit contains four 96GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro X14SDW-40C-SP9F motherboard. It delivers 288-pin DDR5 memory with CL46 latency at 1.10V for server workloads that require high capacity and error correction.

Critical spec: 2Rx4 Registered ECC at DDR5-5600

The memory controller expects exactly 2Rx4 Registered ECC modules at DDR5-5600 (PC5-44800) with 1.10V operation; any other rank, voltage, or buffering type will prevent the system from recognizing the full 384GB at rated speed.

For Supermicro X14SDW-40C-SP9F upgrades only

Suitable for administrators populating all four slots on this specific board with validated 96GB RDIMMs; not for builds needing UDIMM, SODIMM, non-ECC, or lower-capacity modules that the board's population rules do not support.

Priekšrocības

  • 384 GB capacity in a 4 × 96 GB kit for dense server workloads
  • DDR5 5600 MHz PC5-44800 speed with CL46 latency for responsive data access
  • Registered ECC RDIMM architecture corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in fully populated slots
  • 288-pin 2Rx4 modules validated for Supermicro X14SDW-40C-SP9F motherboard compatibility

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the DDR5-5600 speed run at full 5600MHz on the Supermicro X14SDW-40C-SP9F?

Yes, the kit is spec-matched to the board's DDR5-5600 memory controller so all four slots operate at the rated 5600MHz when populated per the manual.

Does the PC5-44800 rating limit bandwidth on this motherboard?

PC5-44800 is the JEDEC peak transfer rate for DDR5-5600; the X14SDW-40C-SP9F's controller supports that ceiling natively.

Do the 288-pin RDIMMs fit the X14SDW-40C-SP9F DIMM slots without adapters?

The board uses standard DDR5 RDIMM sockets; the 288-pin modules seat directly following the population order in the system manual.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.