Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 384GB 4x96GB 5600MHz CL46 1.1V 2Rx4 Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-TDYG-G4J33

384 GB DDR5 ECC registered server memory kit in four 96 GB modules at 5600 MHz CL46 1.1 V 2Rx4 for Supermicro X14SDW-40C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

  • 384 GB capacity in a 4 × 96 GB kit for dense server workloads
  • DDR5 5600 MHz PC5-44800 speed with CL46 latency for responsive data access
  • Registered ECC RDIMM architecture corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in fully populated slots
  • 288-pin 2Rx4 modules validated for Supermicro X14SDW-40C-SP9F motherboard compatibility

384GB DDR5 ECC RDIMM kit

This 384GB kit contains four 96GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro X14SDW-40C-SP9F motherboard. It delivers 288-pin DDR5 memory with CL46 latency at 1.10V for server workloads that require high capacity and error correction.

Critical spec: 2Rx4 Registered ECC at DDR5-5600

The memory controller expects exactly 2Rx4 Registered ECC modules at DDR5-5600 (PC5-44800) with 1.10V operation; any other rank, voltage, or buffering type will prevent the system from recognizing the full 384GB at rated speed.

For Supermicro X14SDW-40C-SP9F upgrades only

Suitable for administrators populating all four slots on this specific board with validated 96GB RDIMMs; not for builds needing UDIMM, SODIMM, non-ECC, or lower-capacity modules that the board's population rules do not support.

Přednosti

  • 384 GB capacity in a 4 × 96 GB kit for dense server workloads
  • DDR5 5600 MHz PC5-44800 speed with CL46 latency for responsive data access
  • Registered ECC RDIMM architecture corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in fully populated slots
  • 288-pin 2Rx4 modules validated for Supermicro X14SDW-40C-SP9F motherboard compatibility

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the DDR5-5600 speed run at full 5600MHz on the Supermicro X14SDW-40C-SP9F?

Yes, the kit is spec-matched to the board's DDR5-5600 memory controller so all four slots operate at the rated 5600MHz when populated per the manual.

Does the PC5-44800 rating limit bandwidth on this motherboard?

PC5-44800 is the JEDEC peak transfer rate for DDR5-5600; the X14SDW-40C-SP9F's controller supports that ceiling natively.

Do the 288-pin RDIMMs fit the X14SDW-40C-SP9F DIMM slots without adapters?

The board uses standard DDR5 RDIMM sockets; the 288-pin modules seat directly following the population order in the system manual.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.