Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 70mm square frame fan with hydraulic bearing and 3-pin connector

OEM Industries

OEM Industries AD07012HX207300 70mm 12V .23A 3-pin hydraulic fan

SKU CH-NBFM-C386P

A 70 mm hydraulic-bearing case fan with a 3-pin 12 V .23 A connector for compact cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • LEDNo
  • 70 mm frame fits tight chassis spaces
  • Hydraulic bearing reduces friction for quieter operation
  • 12 V 0.23 A draw keeps power use low
  • Three-pin connector enables simple motherboard control
  • 20 mm thickness suits slim projectors and cases

Compact 70 mm hydraulic fan for tight builds

This OEM Industries 70 mm fan uses a hydraulic bearing and runs on 12 V at 0.23 A through a standard 3-pin connector. It is designed for small-form-factor cases, projector coolers or any slot that only fits a 70 x 20 mm frame. The black finish keeps the look neutral inside the chassis.

Direct swap for worn 70 mm sleeve-bearing units

Replace an ageing 70 mm fan that has become noisy or lost airflow with this hydraulic-bearing model. The upgrade is worth it when the original fan uses a sleeve bearing that has dried out, or when the 3-pin header on the board is the only available connection. No larger fan will fit the same mounting holes.

Verify 70 mm mounting spacing

Measure the screw-hole pattern to confirm it matches the 70 mm square layout. Ensure the motherboard or fan controller provides a 3-pin header; a 4-pin PWM header will run the fan at full speed without speed control. Check that 12 V and 0.23 A are within the header’s current limit.

Privalumai

  • 70 mm frame fits tight chassis spaces
  • Hydraulic bearing reduces friction for quieter operation
  • 12 V 0.23 A draw keeps power use low
  • Three-pin connector enables simple motherboard control
  • 20 mm thickness suits slim projectors and cases

Specifikacijos

ModelAD07012HX207300
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeHydraulic
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

Will this 70mm fan fit a standard 70mm mounting pattern?

Yes, the 70mm frame matches the common 70mm hole spacing used on many cases and coolers.

How do I connect the 3-pin connector to a 4-pin motherboard header?

Align the keyed 3-pin plug with the 4-pin header's guide; the fourth pin stays empty and speed is controlled by voltage.

Does the hydraulic bearing need lubrication later?

No, the sealed hydraulic bearing is maintenance-free for the fan's service life.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.