Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 70mm square frame fan with hydraulic bearing and 3-pin connector

OEM Industries

OEM Industries AD07012HX207300 70mm 12V .23A 3-pin hydraulic fan

SKU CH-NBFM-C386P

A 70 mm hydraulic-bearing case fan with a 3-pin 12 V .23 A connector for compact cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • LEDNo
  • 70 mm frame fits tight chassis spaces
  • Hydraulic bearing reduces friction for quieter operation
  • 12 V 0.23 A draw keeps power use low
  • Three-pin connector enables simple motherboard control
  • 20 mm thickness suits slim projectors and cases

Compact 70 mm hydraulic fan for tight builds

This OEM Industries 70 mm fan uses a hydraulic bearing and runs on 12 V at 0.23 A through a standard 3-pin connector. It is designed for small-form-factor cases, projector coolers or any slot that only fits a 70 x 20 mm frame. The black finish keeps the look neutral inside the chassis.

Direct swap for worn 70 mm sleeve-bearing units

Replace an ageing 70 mm fan that has become noisy or lost airflow with this hydraulic-bearing model. The upgrade is worth it when the original fan uses a sleeve bearing that has dried out, or when the 3-pin header on the board is the only available connection. No larger fan will fit the same mounting holes.

Verify 70 mm mounting spacing

Measure the screw-hole pattern to confirm it matches the 70 mm square layout. Ensure the motherboard or fan controller provides a 3-pin header; a 4-pin PWM header will run the fan at full speed without speed control. Check that 12 V and 0.23 A are within the header’s current limit.

Puncte forte

  • 70 mm frame fits tight chassis spaces
  • Hydraulic bearing reduces friction for quieter operation
  • 12 V 0.23 A draw keeps power use low
  • Three-pin connector enables simple motherboard control
  • 20 mm thickness suits slim projectors and cases

Specificații

ModelAD07012HX207300
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeHydraulic
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

Will this 70mm fan fit a standard 70mm mounting pattern?

Yes, the 70mm frame matches the common 70mm hole spacing used on many cases and coolers.

How do I connect the 3-pin connector to a 4-pin motherboard header?

Align the keyed 3-pin plug with the 4-pin header's guide; the fourth pin stays empty and speed is controlled by voltage.

Does the hydraulic bearing need lubrication later?

No, the sealed hydraulic bearing is maintenance-free for the fan's service life.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.