Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black USB-A male to 5-pin terminal block converter, compact rectangular shape, 62 by 33 by 16 mm

UOTEK

UOTEK UT-885 USB to RS-485 RS-422 Converter 5-pin Terminal Block

SKU CH-966W-Q2X0W

Converts USB to RS-485 or RS-422 with 600 W surge protection and 1200 m range at 9600 bps

  • TypeCONVERTER
  • ColorBlack
  • Connector AUSB-A MALE
  • Connector B5PIN TERMINAL BLOCK
  • Package Quantity1PC
  • Package Contents1*UT-885
  • Asynchronous half-duplex or full-duplex modes supported
  • Auto direction control removes manual configuration needs
  • Baud rates from 300 to 921.6Kbps auto-detected
  • Connects up to 32 RS-485 or RS-422 devices
  • 1200m transmission distance at 9600bps over twisted pair

What this converter does

The UOTEK UT-885 connects a USB 2.0 port to RS-485 or RS-422 serial networks using a 5-pin terminal block. It supports asynchronous communication in half-duplex or full-duplex modes with automatic direction control. The adapter draws power from the USB bus and works with Windows, Mac, Linux and legacy CE systems.

Check your cabling and device count

Verify that your serial devices use twisted-pair or shielded cable and that the total RS-485/422 bus length stays within 1,200 metres at 9,600 bps. The USB link itself must not exceed 5 metres. Ensure you do not exceed 32 devices on a single multi-point segment and that the baud rate falls between 300 and 921.6 Kbps.

Ideal for industrial integrators.

This converter suits engineers linking PLCs, sensors or HMIs over long industrial buses where surge and ±15 kV ESD protection matter. It is not intended for users who need a simple USB-to-DB9 cable for a single nearby device or who require galvanic isolation beyond the built-in 600 W lightning rating.

Puncte forte

  • Asynchronous half-duplex or full-duplex modes supported
  • Auto direction control removes manual configuration needs
  • Baud rates from 300 to 921.6Kbps auto-detected
  • Connects up to 32 RS-485 or RS-422 devices
  • 1200m transmission distance at 9600bps over twisted pair

Specificații

BrandUOTEK
ModelUT-885
TypeCONVERTER
ColorBlack
Connector AUSB-A MALE
Connector B5PIN TERMINAL BLOCK
Package Quantity1PC
Package Contents1*UT-885

Întrebări despre acest articol

What comes in the box and do I need to buy a cable separately?

The package includes one UT-885 converter with a USB-A male connector and a 5-pin terminal block. You must supply your own twisted-pair or shielded cable for the RS-485/422 side.

Which operating systems does the UT-885 support?

The converter works with Windows 2000, XP, Vista, 7, 8, 8.1, 10, CE, Mac and Linux. No external power supply is required.

What does the 921.6Kbps baud rate mean for real-world wiring?

The auto-detect serial signal runs from 300 to 921.6Kbps. At 9,600bps the RS-485/422 link reaches 1,200m; the USB link is limited to 5m.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.