Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 90mm square cooling fan with 25mm depth and two-wire connector

OEM Industries

OEM Industries FSY92S12M 90mm 12V 0.25A 2 Pin Fan

SKU CH-YM3D-6WJBE

90 mm sleeve-bearing fan runs on 12 V at 0.25 A with a 2-pin connector for case or power-supply cooling

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 90 mm frame fits tight case layouts
  • 12 V 0.25 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-pin connector plugs straight into legacy headers
  • black finish blends with dark chassis builds

Compact 90 mm Case Fan

The OEM Industries FSY92S12M is a 90 mm square fan designed for case or power-supply cooling. It runs on a 12 V supply and draws 0.25 A through a two-pin connector. The black frame fits standard 90 mm mounting points. It suits builders who need a basic replacement airflow device.

Sleeve Bearing Thermals

A sleeve bearing keeps running noise low during typical desktop loads. The 12 V 0.25 A rating limits power draw to a modest level for continuous operation. No LED lighting means no extra electrical load. Buyers who need ball-bearing longevity or PWM speed control should look elsewhere.

Two-Pin Simplicity

The two-wire, two-pin plug connects directly to a motherboard header or power-supply lead without adapters. No bundled software or speed-profile utilities are included. The bare-fan package assumes the installer already has mounting screws. Users wanting rubber grommets or fan filters must source them separately.

Privalumai

  • 90 mm frame fits tight case layouts
  • 12 V 0.25 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-pin connector plugs straight into legacy headers
  • black finish blends with dark chassis builds

Specifikacijos

ModelFSY92S12M
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

How do I install the FSY92S12M 90mm fan and connect its 2 pin power connector?

Mount the 90mm frame using four screws through the corner holes, then plug the 2 pin connector into a 12V fan header on the motherboard or power supply; the keyed plug prevents reversed polarity.

What maintenance will the sleeve bearing fan need over time?

The sleeve bearing is not user-serviceable; when noise or vibration increases after extended running, replace the entire 90mm unit.

At what point does the 0.25A current limit restrict sustained airflow?

The fan draws a fixed 0.25A at 12V, so its maximum airflow is capped by that power budget and cannot be increased under load.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.