暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 90mm square cooling fan with 25mm depth and two-wire connector

OEM Industries

OEM Industries FSY92S12M 90mm 12V 0.25A 2 Pin Fan

SKU CH-YM3D-6WJBE

90 mm sleeve-bearing fan runs on 12 V at 0.25 A with a 2-pin connector for case or power-supply cooling

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 90 mm frame fits tight case layouts
  • 12 V 0.25 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-pin connector plugs straight into legacy headers
  • black finish blends with dark chassis builds

Compact 90 mm Case Fan

The OEM Industries FSY92S12M is a 90 mm square fan designed for case or power-supply cooling. It runs on a 12 V supply and draws 0.25 A through a two-pin connector. The black frame fits standard 90 mm mounting points. It suits builders who need a basic replacement airflow device.

Sleeve Bearing Thermals

A sleeve bearing keeps running noise low during typical desktop loads. The 12 V 0.25 A rating limits power draw to a modest level for continuous operation. No LED lighting means no extra electrical load. Buyers who need ball-bearing longevity or PWM speed control should look elsewhere.

Two-Pin Simplicity

The two-wire, two-pin plug connects directly to a motherboard header or power-supply lead without adapters. No bundled software or speed-profile utilities are included. The bare-fan package assumes the installer already has mounting screws. Users wanting rubber grommets or fan filters must source them separately.

特長

  • 90 mm frame fits tight case layouts
  • 12 V 0.25 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-pin connector plugs straight into legacy headers
  • black finish blends with dark chassis builds

仕様

ModelFSY92S12M
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

この商品に関する質問

How do I install the FSY92S12M 90mm fan and connect its 2 pin power connector?

Mount the 90mm frame using four screws through the corner holes, then plug the 2 pin connector into a 12V fan header on the motherboard or power supply; the keyed plug prevents reversed polarity.

What maintenance will the sleeve bearing fan need over time?

The sleeve bearing is not user-serviceable; when noise or vibration increases after extended running, replace the entire 90mm unit.

At what point does the 0.25A current limit restrict sustained airflow?

The fan draws a fixed 0.25A at 12V, so its maximum airflow is capped by that power budget and cannot be increased under load.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。