Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 90mm square cooling fan with 25mm depth and two-wire connector

OEM Industries

OEM Industries FSY92S12M 90mm 12V 0.25A 2 Pin Fan

SKU CH-YM3D-6WJBE

90 mm sleeve-bearing fan runs on 12 V at 0.25 A with a 2-pin connector for case or power-supply cooling

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 90 mm frame fits tight case layouts
  • 12 V 0.25 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-pin connector plugs straight into legacy headers
  • black finish blends with dark chassis builds

Compact 90 mm Case Fan

The OEM Industries FSY92S12M is a 90 mm square fan designed for case or power-supply cooling. It runs on a 12 V supply and draws 0.25 A through a two-pin connector. The black frame fits standard 90 mm mounting points. It suits builders who need a basic replacement airflow device.

Sleeve Bearing Thermals

A sleeve bearing keeps running noise low during typical desktop loads. The 12 V 0.25 A rating limits power draw to a modest level for continuous operation. No LED lighting means no extra electrical load. Buyers who need ball-bearing longevity or PWM speed control should look elsewhere.

Two-Pin Simplicity

The two-wire, two-pin plug connects directly to a motherboard header or power-supply lead without adapters. No bundled software or speed-profile utilities are included. The bare-fan package assumes the installer already has mounting screws. Users wanting rubber grommets or fan filters must source them separately.

Helstu kostir

  • 90 mm frame fits tight case layouts
  • 12 V 0.25 A draw keeps power use low
  • sleeve bearing runs quietly at idle
  • two-pin connector plugs straight into legacy headers
  • black finish blends with dark chassis builds

Tæknilýsing

ModelFSY92S12M
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Spurningar um þessa vöru

How do I install the FSY92S12M 90mm fan and connect its 2 pin power connector?

Mount the 90mm frame using four screws through the corner holes, then plug the 2 pin connector into a 12V fan header on the motherboard or power supply; the keyed plug prevents reversed polarity.

What maintenance will the sleeve bearing fan need over time?

The sleeve bearing is not user-serviceable; when noise or vibration increases after extended running, replace the entire 90mm unit.

At what point does the 0.25A current limit restrict sustained airflow?

The fan draws a fixed 0.25A at 12V, so its maximum airflow is capped by that power budget and cannot be increased under load.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.