Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 120mm sleeve-bearing CPU cooler fan with three-pin connector

OEM Industries

OEM Industries KM121225LS 120mm Sleeve Bearing CPU cooler

SKU CH-G755-09XFP

A 120 mm sleeve-bearing fan drawing 0.18 A at 12 V with a two-wire three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDNo
  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

Compact 120 mm fan for basic CPU cooling

The OEM Industries KM121225LS is a 120 mm sleeve-bearing fan intended as a replacement or upgrade for stock CPU coolers. It suits builders who need a simple, low-cost airflow solution for standard desktop processors.

Sleeve bearing and two-wire power connector

The fan uses a sleeve bearing for quiet operation at low speeds and connects via a two-wire lead that fits a three-pin header. The black frame blends with most builds, while the lack of LEDs keeps the appearance understated.

Low power draw and modest thermal performance

Rated at 12 V and 0.18 A, the motor draws minimal power from the motherboard header. In normal use it moves enough air for entry-level CPUs but will not satisfy high-TDP chips or overclocked workloads.

Privalumai

  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

Specifikacijos

ModelKM121225LS
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDNo

Klausimai apie šią prekę

What power connector does the KM121225LS use and what voltage does it draw?

The cooler uses a 3-pin connector carrying two wires and is rated for 12 V at 0.18 A.

What are the physical dimensions and mounting points of the KM121225LS?

The unit is a 120 mm square fan frame with standard corner mounting holes for 120 mm fan positions on cases or heatsinks.

How do you install the KM121225LS and which orientation step is often missed?

Mount the fan with four screws through the corner holes, then connect the 3-pin plug to a 12 V fan header; the arrow on the frame must point in the desired airflow direction.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.