Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 120mm sleeve-bearing CPU cooler fan with three-pin connector

OEM Industries

OEM Industries KM121225LS 120mm Sleeve Bearing CPU cooler

SKU CH-G755-09XFP

A 120 mm sleeve-bearing fan drawing 0.18 A at 12 V with a two-wire three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDNo
  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

Compact 120 mm fan for basic CPU cooling

The OEM Industries KM121225LS is a 120 mm sleeve-bearing fan intended as a replacement or upgrade for stock CPU coolers. It suits builders who need a simple, low-cost airflow solution for standard desktop processors.

Sleeve bearing and two-wire power connector

The fan uses a sleeve bearing for quiet operation at low speeds and connects via a two-wire lead that fits a three-pin header. The black frame blends with most builds, while the lack of LEDs keeps the appearance understated.

Low power draw and modest thermal performance

Rated at 12 V and 0.18 A, the motor draws minimal power from the motherboard header. In normal use it moves enough air for entry-level CPUs but will not satisfy high-TDP chips or overclocked workloads.

Priekšrocības

  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

Specifikācijas

ModelKM121225LS
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDNo

Jautājumi par šo preci

What power connector does the KM121225LS use and what voltage does it draw?

The cooler uses a 3-pin connector carrying two wires and is rated for 12 V at 0.18 A.

What are the physical dimensions and mounting points of the KM121225LS?

The unit is a 120 mm square fan frame with standard corner mounting holes for 120 mm fan positions on cases or heatsinks.

How do you install the KM121225LS and which orientation step is often missed?

Mount the fan with four screws through the corner holes, then connect the 3-pin plug to a 12 V fan header; the arrow on the frame must point in the desired airflow direction.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.