Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 120mm sleeve-bearing CPU cooler fan with three-pin connector

OEM Industries

OEM Industries KM121225LS 120mm Sleeve Bearing CPU cooler

SKU CH-G755-09XFP

A 120 mm sleeve-bearing fan drawing 0.18 A at 12 V with a two-wire three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDNo
  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

Compact 120 mm fan for basic CPU cooling

The OEM Industries KM121225LS is a 120 mm sleeve-bearing fan intended as a replacement or upgrade for stock CPU coolers. It suits builders who need a simple, low-cost airflow solution for standard desktop processors.

Sleeve bearing and two-wire power connector

The fan uses a sleeve bearing for quiet operation at low speeds and connects via a two-wire lead that fits a three-pin header. The black frame blends with most builds, while the lack of LEDs keeps the appearance understated.

Low power draw and modest thermal performance

Rated at 12 V and 0.18 A, the motor draws minimal power from the motherboard header. In normal use it moves enough air for entry-level CPUs but will not satisfy high-TDP chips or overclocked workloads.

Poudarki

  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

Specifikacije

ModelKM121225LS
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDNo

Vprašanja o tem izdelku

What power connector does the KM121225LS use and what voltage does it draw?

The cooler uses a 3-pin connector carrying two wires and is rated for 12 V at 0.18 A.

What are the physical dimensions and mounting points of the KM121225LS?

The unit is a 120 mm square fan frame with standard corner mounting holes for 120 mm fan positions on cases or heatsinks.

How do you install the KM121225LS and which orientation step is often missed?

Mount the fan with four screws through the corner holes, then connect the 3-pin plug to a 12 V fan header; the arrow on the frame must point in the desired airflow direction.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.