Orico 2.5" USB 3.1 SATA Enclosure Black Grid Texture
- Black
- 2.5"
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Orico
A 2.5-inch SATA drive enclosure with USB 3.0 interface delivering 5 Gbps transfer speed for 7mm and 9.5mm drives up to 4TB capacity
Size USB 3.0
This Orico 2.5 inch enclosure converts a SATA solid-state drive or hard disk into an external USB 3.0 storage device. It accepts a single 2.5 inch drive measuring 7mm or 9.5mm thick and supports capacities up to 6TB per bay. The black ABS shell uses a grid texture for grip and passive cooling, and the tool-free design lets you swap drives without a screwdriver. Power comes entirely from the USB connection, so no separate adapter is needed.
Laptop and desktop users who want a lightweight, portable way to access a spare 2.5 inch SATA drive will find the plug-and-play operation convenient. LED status indication and driver-free hot-swap support simplify daily use. Builders needing 3.5 inch drive support, multi-bay RAID configurations, or an external power supply for sustained heavy workloads should look at a different enclosure class.
The external interface is USB 3.0 with a 5 Gbps theoretical maximum transfer rate, falling back to 480 Mbps on USB 2.0 ports. The internal connection is SATA 3.0, so the enclosure will not limit a modern SATA SSD beyond the USB bus ceiling. If your workflow demands sustained throughput above the USB 3.0 limit, this enclosure will not meet that requirement.
| Brand | ORICO |
|---|---|
| Color | Black |
| Size | 2.5" |
| Type | Enclosure |
| AC Adapter | No |
| Material | Plastic |
| Internal Interface | SATA |
| External Interface | SATA |
| HDD Count Supported | Single HDD |
| Number of Bay | 1 Bay |
| Maximum Capacity (per Bay) | Up to 6TB |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
It fits both 7 mm and 9.5 mm SATA drives, so standard laptop hard drives and SSDs will mount without spacers.
Slide the drive into the SATA connector, close the lid and the internal latch holds it — no screws or tools are required.
No AC adapter is included; it draws power from the USB 3.0 port, which supports drives up to the stated capacity limit.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?