Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black plastic 2.5 inch SATA drive enclosure with grid texture finish

Orico

Orico 2.5" USB 3.0 SATA Drive Enclosure Black

SKU CH-HRMV-QV8G9

A 2.5-inch SATA drive enclosure with USB 3.0 interface delivering 5 Gbps transfer speed for 7mm and 9.5mm drives up to 4TB capacity

  • ColorBlack
  • Size2.5"
  • TypeEnclosure
  • AC AdapterNo
  • MaterialPlastic
  • Internal InterfaceSATA

Size USB 3.0

  • Tool-free installation lets you swap drives in seconds
  • USB 3.0 interface delivers up to 5 Gbps transfer speed
  • Supports 2.5 inch SATA drives up to 4 TB capacity
  • Fits both 7 mm and 9.5 mm drive heights
  • Grid-texture ABS shell resists fingerprints and aids heat dissipation

Product identity

This Orico 2.5 inch enclosure converts a SATA solid-state drive or hard disk into an external USB 3.0 storage device. It accepts a single 2.5 inch drive measuring 7mm or 9.5mm thick and supports capacities up to 6TB per bay. The black ABS shell uses a grid texture for grip and passive cooling, and the tool-free design lets you swap drives without a screwdriver. Power comes entirely from the USB connection, so no separate adapter is needed.

Who it suits

Laptop and desktop users who want a lightweight, portable way to access a spare 2.5 inch SATA drive will find the plug-and-play operation convenient. LED status indication and driver-free hot-swap support simplify daily use. Builders needing 3.5 inch drive support, multi-bay RAID configurations, or an external power supply for sustained heavy workloads should look at a different enclosure class.

Deciding specification

The external interface is USB 3.0 with a 5 Gbps theoretical maximum transfer rate, falling back to 480 Mbps on USB 2.0 ports. The internal connection is SATA 3.0, so the enclosure will not limit a modern SATA SSD beyond the USB bus ceiling. If your workflow demands sustained throughput above the USB 3.0 limit, this enclosure will not meet that requirement.

Pluspunten

  • Tool-free installation lets you swap drives in seconds
  • USB 3.0 interface delivers up to 5 Gbps transfer speed
  • Supports 2.5 inch SATA drives up to 4 TB capacity
  • Fits both 7 mm and 9.5 mm drive heights
  • Grid-texture ABS shell resists fingerprints and aids heat dissipation

Specificaties

BrandORICO
ColorBlack
Size2.5"
TypeEnclosure
AC AdapterNo
MaterialPlastic
Internal InterfaceSATA
External InterfaceSATA
HDD Count SupportedSingle HDD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 6TB

Andere versies van dit model

Nog 2 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What drive thickness does the 2.5 inch enclosure accept?

It fits both 7 mm and 9.5 mm SATA drives, so standard laptop hard drives and SSDs will mount without spacers.

How is the drive secured inside the tool-free case?

Slide the drive into the SATA connector, close the lid and the internal latch holds it — no screws or tools are required.

Does the enclosure need a power adapter for larger drives?

No AC adapter is included; it draws power from the USB 3.0 port, which supports drives up to the stated capacity limit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.