Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with black memory chips and gold edge connectors

OWC

OWC 8GB DDR3 1333 ECC Unbuffered UDIMM desktop RAM

SKU CH-JFE4-DSJ1W

An 8 GB DDR3 1333 ECC unbuffered UDIMM for desktop, workstation and server upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB

  • Error-correcting ECC protects data integrity in critical workloads
  • 8 GB capacity adds headroom for multitasking and large files
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered UDIMM fits desktop, workstation and server slots

Single 8 GB DDR3 ECC module

This OWC UDIMM provides 8 GB of DDR3 memory rated at 1333 MHz with CL9 latency and 1.5 V operation. It uses a 240-pin unbuffered ECC design built to JEDEC and RoHS standards. The module carries a limited lifetime warranty and is intended for desktop workstations, servers and NAS systems.

Suited for ECC-capable DDR3 platforms

The module fits systems that accept unbuffered ECC DDR3 UDIMMs, such as older workstation, server or NAS boards. It is not appropriate for platforms that require registered memory or non-ECC modules only. Buyers should verify their motherboard documentation for ECC UDIMM support before purchasing.

Unbuffered ECC with CL9 timing

The decisive specification is the unbuffered ECC architecture combined with CL9 timing at 1333 MHz. This combination determines whether the module will initialise correctly on a given board. Match this profile exactly to the system’s qualified-vendor list to ensure compatibility.

Privalumai

  • Error-correcting ECC protects data integrity in critical workloads
  • 8 GB capacity adds headroom for multitasking and large files
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered UDIMM fits desktop, workstation and server slots

Specifikacijos

BrandOWC
Part Number1E3D32R808GB
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does my motherboard need a 240-pin DDR3 slot that accepts 1.5 V unbuffered ECC modules?

Yes — the module is a 240-pin DDR3 DIMM rated at 1.5 V with ECC unbuffered operation, so the board must provide that exact slot type and voltage.

Will this 1333 MHz CL9 stick run reliably if I keep slower DDR3 modules already installed?

The memory will down-clock to the lowest common speed and tightest timings among all installed modules; stability depends on the motherboard handling mixed speeds correctly.

How can I verify the stick is detected at its rated 1333 MHz with ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1333 MHz and the ECC status shows enabled; OS-level tools such as dmidecode or CPU-Z will report the same values.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.