Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular circuit board with black memory chips and gold edge connectors

OWC

OWC 8GB DDR3 1333 ECC Unbuffered UDIMM desktop RAM

SKU CH-JFE4-DSJ1W

An 8 GB DDR3 1333 ECC unbuffered UDIMM for desktop, workstation and server upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB

  • Error-correcting ECC protects data integrity in critical workloads
  • 8 GB capacity adds headroom for multitasking and large files
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered UDIMM fits desktop, workstation and server slots

Single 8 GB DDR3 ECC module

This OWC UDIMM provides 8 GB of DDR3 memory rated at 1333 MHz with CL9 latency and 1.5 V operation. It uses a 240-pin unbuffered ECC design built to JEDEC and RoHS standards. The module carries a limited lifetime warranty and is intended for desktop workstations, servers and NAS systems.

Suited for ECC-capable DDR3 platforms

The module fits systems that accept unbuffered ECC DDR3 UDIMMs, such as older workstation, server or NAS boards. It is not appropriate for platforms that require registered memory or non-ECC modules only. Buyers should verify their motherboard documentation for ECC UDIMM support before purchasing.

Unbuffered ECC with CL9 timing

The decisive specification is the unbuffered ECC architecture combined with CL9 timing at 1333 MHz. This combination determines whether the module will initialise correctly on a given board. Match this profile exactly to the system’s qualified-vendor list to ensure compatibility.

Puncte forte

  • Error-correcting ECC protects data integrity in critical workloads
  • 8 GB capacity adds headroom for multitasking and large files
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered UDIMM fits desktop, workstation and server slots

Specificații

BrandOWC
Part Number1E3D32R808GB
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does my motherboard need a 240-pin DDR3 slot that accepts 1.5 V unbuffered ECC modules?

Yes — the module is a 240-pin DDR3 DIMM rated at 1.5 V with ECC unbuffered operation, so the board must provide that exact slot type and voltage.

Will this 1333 MHz CL9 stick run reliably if I keep slower DDR3 modules already installed?

The memory will down-clock to the lowest common speed and tightest timings among all installed modules; stability depends on the motherboard handling mixed speeds correctly.

How can I verify the stick is detected at its rated 1333 MHz with ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1333 MHz and the ECC status shows enabled; OS-level tools such as dmidecode or CPU-Z will report the same values.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.