Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with black memory chips and gold edge connectors

OWC

OWC 8GB DDR3 1333 ECC Unbuffered UDIMM desktop RAM

SKU CH-JFE4-DSJ1W

An 8 GB DDR3 1333 ECC unbuffered UDIMM for desktop, workstation and server upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB

  • Error-correcting ECC protects data integrity in critical workloads
  • 8 GB capacity adds headroom for multitasking and large files
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered UDIMM fits desktop, workstation and server slots

Single 8 GB DDR3 ECC module

This OWC UDIMM provides 8 GB of DDR3 memory rated at 1333 MHz with CL9 latency and 1.5 V operation. It uses a 240-pin unbuffered ECC design built to JEDEC and RoHS standards. The module carries a limited lifetime warranty and is intended for desktop workstations, servers and NAS systems.

Suited for ECC-capable DDR3 platforms

The module fits systems that accept unbuffered ECC DDR3 UDIMMs, such as older workstation, server or NAS boards. It is not appropriate for platforms that require registered memory or non-ECC modules only. Buyers should verify their motherboard documentation for ECC UDIMM support before purchasing.

Unbuffered ECC with CL9 timing

The decisive specification is the unbuffered ECC architecture combined with CL9 timing at 1333 MHz. This combination determines whether the module will initialise correctly on a given board. Match this profile exactly to the system’s qualified-vendor list to ensure compatibility.

Kohokohdat

  • Error-correcting ECC protects data integrity in critical workloads
  • 8 GB capacity adds headroom for multitasking and large files
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered UDIMM fits desktop, workstation and server slots

Tekniset tiedot

BrandOWC
Part Number1E3D32R808GB
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does my motherboard need a 240-pin DDR3 slot that accepts 1.5 V unbuffered ECC modules?

Yes — the module is a 240-pin DDR3 DIMM rated at 1.5 V with ECC unbuffered operation, so the board must provide that exact slot type and voltage.

Will this 1333 MHz CL9 stick run reliably if I keep slower DDR3 modules already installed?

The memory will down-clock to the lowest common speed and tightest timings among all installed modules; stability depends on the motherboard handling mixed speeds correctly.

How can I verify the stick is detected at its rated 1333 MHz with ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1333 MHz and the ECC status shows enabled; OS-level tools such as dmidecode or CPU-Z will report the same values.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.