Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Brass male-to-female G 1/4 inch extension coupler 35mm length knurled finish

PrimoChill

PrimoChill Male to Female G 1/4in 35mm SX Extension Coupler diy cooling

SKU CH-M748-1C3HF

A coated-brass G 1/4in male-to-female extension coupler adds 35mm of clearance between water-cooling fittings

  • TypeCPU Block

Option UV Red

Rodyti 9 daugiau konfigūracijų

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Extends fittings by 35 mm for tight clearances
  • Male-to-female G 1/4 in threads connect standard water-cooling parts
  • Coated brass body resists corrosion in custom loops
  • 40 mm overall height including threads keeps profile low
  • Includes pre-installed O-ring on male side for leak-free seal

Extension Coupler for Custom Loops

The PrimoChill Male to Female G 1/4in 35mm SX Extension Coupler adds length to a water-cooling fitting so builders can clear obstructions in tight routing paths. It suits anyone assembling a custom loop who needs a little extra reach between components.

Coated Brass Construction

The coupler is machined from coated brass with a 35mm body height and 40mm overall height including threads. One end carries a male G 1/4in thread with a pre-installed O-ring, the other a female G 1/4in thread for a secure, leak-resistant seal.

Sustained Pressure Sealing

Under continuous loop pressure the brass threads and seated O-ring maintain their seal without deformation. The fixed 35mm extension does not flex, so alignment stays constant during long-term operation.

Privalumai

  • Extends fittings by 35 mm for tight clearances
  • Male-to-female G 1/4 in threads connect standard water-cooling parts
  • Coated brass body resists corrosion in custom loops
  • 40 mm overall height including threads keeps profile low
  • Includes pre-installed O-ring on male side for leak-free seal

Specifikacijos

TypeCPU Block

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the PrimoChill G 1/4in 35mm SX Extension Coupler, and which step is often missed?

Screw the male thread into the component and the female thread onto the fitting; the step people forget is confirming the pre-installed O-ring on the male side seats fully before tightening.

What maintenance or replacement will the PrimoChill G 1/4in 35mm SX Extension Coupler need later?

Inspect the coated brass body and the installed O-ring periodically; replace the O-ring if it hardens or shows cracks to maintain a leak-free seal.

What limit appears first on the PrimoChill G 1/4in 35mm SX Extension Coupler under sustained use?

The 35mm body length and 40mm overall height fix the clearance envelope; if components shift and exceed that space the coupler cannot compensate.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.