Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Brass male-to-female G 1/4 inch extension coupler 35mm length knurled finish

PrimoChill

PrimoChill Male to Female G 1/4in 35mm SX Extension Coupler diy cooling

SKU CH-M748-1C3HF

A coated-brass G 1/4in male-to-female extension coupler adds 35mm of clearance between water-cooling fittings

  • TypeCPU Block

Option UV Red

Sjá 9 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Extends fittings by 35 mm for tight clearances
  • Male-to-female G 1/4 in threads connect standard water-cooling parts
  • Coated brass body resists corrosion in custom loops
  • 40 mm overall height including threads keeps profile low
  • Includes pre-installed O-ring on male side for leak-free seal

Extension Coupler for Custom Loops

The PrimoChill Male to Female G 1/4in 35mm SX Extension Coupler adds length to a water-cooling fitting so builders can clear obstructions in tight routing paths. It suits anyone assembling a custom loop who needs a little extra reach between components.

Coated Brass Construction

The coupler is machined from coated brass with a 35mm body height and 40mm overall height including threads. One end carries a male G 1/4in thread with a pre-installed O-ring, the other a female G 1/4in thread for a secure, leak-resistant seal.

Sustained Pressure Sealing

Under continuous loop pressure the brass threads and seated O-ring maintain their seal without deformation. The fixed 35mm extension does not flex, so alignment stays constant during long-term operation.

Helstu kostir

  • Extends fittings by 35 mm for tight clearances
  • Male-to-female G 1/4 in threads connect standard water-cooling parts
  • Coated brass body resists corrosion in custom loops
  • 40 mm overall height including threads keeps profile low
  • Includes pre-installed O-ring on male side for leak-free seal

Tæknilýsing

TypeCPU Block

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the PrimoChill G 1/4in 35mm SX Extension Coupler, and which step is often missed?

Screw the male thread into the component and the female thread onto the fitting; the step people forget is confirming the pre-installed O-ring on the male side seats fully before tightening.

What maintenance or replacement will the PrimoChill G 1/4in 35mm SX Extension Coupler need later?

Inspect the coated brass body and the installed O-ring periodically; replace the O-ring if it hardens or shows cracks to maintain a leak-free seal.

What limit appears first on the PrimoChill G 1/4in 35mm SX Extension Coupler under sustained use?

The 35mm body length and 40mm overall height fix the clearance envelope; if components shift and exceed that space the coupler cannot compensate.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.