Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Satin black 90-degree rotary G1/4 elbow with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Satin Black

SKU CH-CBG2-67TR6

A G1/4 rotary elbow fitting with 20mm extension and 360-degree adjustment for custom liquid-cooling loops

  • TypeFittings

Option Satin Black

Sjá 9 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

20mm Rotary Extension for Custom Loops

This G1/4 90-degree rotary elbow extends a fitting by 20mm while allowing 360-degree orientation. It suits builders who need to route tubing around tight clearances or awkward component layouts in a custom liquid-cooling loop. The male-to-female thread connects directly to existing ports without extra adapters.

Installation Notes and Common Pitfalls

Hand-tighten the male thread into the component port, then rotate the elbow to the desired angle before securing the tubing fitting onto the female end. Over-tightening can damage the brass threads or the satin powder-coated finish. The rotary joint is not designed to support heavy tubing runs without additional brackets.

Compatibility Checks Before Ordering

Verify that every component in your loop uses G1/4 threads and that a 43mm total height and 20mm installed base height fit within your case clearance. Ensure the 90-degree bend direction matches your planned tubing path, as the rotary function only adjusts rotation, not the elbow angle itself.

Helstu kostir

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

Tæknilýsing

TypeFittings

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How can I verify the 90-degree rotary elbow is seated correctly after installation?

Check that the G1/4 male thread engages fully to its 5 mm depth, the installed base height measures 20 mm, and the rotary joint spins freely through 360 degrees without binding.

What comes in the box and do I need any extra seals or tools?

The package includes one Male to Female G1/4 90 Degree Rotary 20mm Extension Elbow Fitting with its SX powder-coated brass body; no additional O-rings or tools are supplied.

Which version should I choose if I need the 20 mm extension height in a satin black finish?

This single SKU provides the 20 mm installed base height, 43 mm total height, G1/4 threading and satin black SX coating — no alternative lengths or colours are offered for this model.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.