저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Satin black 90-degree rotary G1/4 elbow with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Satin Black

SKU CH-CBG2-67TR6

A G1/4 rotary elbow fitting with 20mm extension and 360-degree adjustment for custom liquid-cooling loops

  • TypeFittings

Option Satin Black

구성 9개 더 보기

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

20mm Rotary Extension for Custom Loops

This G1/4 90-degree rotary elbow extends a fitting by 20mm while allowing 360-degree orientation. It suits builders who need to route tubing around tight clearances or awkward component layouts in a custom liquid-cooling loop. The male-to-female thread connects directly to existing ports without extra adapters.

Installation Notes and Common Pitfalls

Hand-tighten the male thread into the component port, then rotate the elbow to the desired angle before securing the tubing fitting onto the female end. Over-tightening can damage the brass threads or the satin powder-coated finish. The rotary joint is not designed to support heavy tubing runs without additional brackets.

Compatibility Checks Before Ordering

Verify that every component in your loop uses G1/4 threads and that a 43mm total height and 20mm installed base height fit within your case clearance. Ensure the 90-degree bend direction matches your planned tubing path, as the rotary function only adjusts rotation, not the elbow angle itself.

주요 특징

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

사양

TypeFittings

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How can I verify the 90-degree rotary elbow is seated correctly after installation?

Check that the G1/4 male thread engages fully to its 5 mm depth, the installed base height measures 20 mm, and the rotary joint spins freely through 360 degrees without binding.

What comes in the box and do I need any extra seals or tools?

The package includes one Male to Female G1/4 90 Degree Rotary 20mm Extension Elbow Fitting with its SX powder-coated brass body; no additional O-rings or tools are supplied.

Which version should I choose if I need the 20 mm extension height in a satin black finish?

This single SKU provides the 20 mm installed base height, 43 mm total height, G1/4 threading and satin black SX coating — no alternative lengths or colours are offered for this model.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.