PrimoChill 90 Degree SX Rotary 20mm Extension Elbow Fitting diy cooling
- Fittings
PrimoChill
A G1/4 rotary elbow fitting adds 20mm of clearance and turns tubing 90 degrees with 360-degree adjustment
Option UV Red
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
The PrimoChill G1/4 90° rotary elbow fitting lets custom-loop builders change tubing direction by ninety degrees without strain. Its male-to-female G1/4 threads install directly into standard water-blocks, radiators or reservoirs. The 360-degree rotary base allows the outlet to be aimed precisely where the run needs to go.
The 20mm installed base height adds a short standoff that clears tall VRM heatsinks, bulky RAM modules or adjacent fittings. Total assembled height reaches 43mm, so the elbow stays compact while providing the extra room needed for tight bends. Brass construction handles normal loop pressures without deformation.
The SX powder coating gives a durable UV-red surface that resists coolant staining and minor abrasion during assembly. Brass threads with a 5mm engagement depth seal reliably under typical operating temperatures. No moving seals contact the fluid, so noise and thermal performance are dictated by the rest of the loop.
| Type | Fittings |
|---|
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, both ends use standard G1/4 threads so the fitting connects directly to any G1/4 port on blocks, radiators or reservoirs.
After tightening, gently rotate the female end through a full 360° turn; it should spin smoothly without binding or leaking.
The box contains one male-to-female 90° rotary 20mm extension elbow; no extra O-rings or washers are supplied.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?