Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Brass G1/4 90-degree rotary elbow fitting with 20mm extension UV red powder coat

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow UV Red

SKU CH-T6HZ-JJBWC

A G1/4 rotary elbow fitting adds 20mm of clearance and turns tubing 90 degrees with 360-degree adjustment

  • TypeFittings

Option UV Red

Zobraziť ďalších 9 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • 360° rotary lets you aim any direction
  • 20 mm extension clears tight component spacing
  • 90° elbow redirects tubing runs instantly
  • G1/4 brass threads ensure leak-free seal
  • UV red powder coat glows under UV light

Loop redirection made simple

The PrimoChill G1/4 90° rotary elbow fitting lets custom-loop builders change tubing direction by ninety degrees without strain. Its male-to-female G1/4 threads install directly into standard water-blocks, radiators or reservoirs. The 360-degree rotary base allows the outlet to be aimed precisely where the run needs to go.

Twenty-millimetre extension for clearance

The 20mm installed base height adds a short standoff that clears tall VRM heatsinks, bulky RAM modules or adjacent fittings. Total assembled height reaches 43mm, so the elbow stays compact while providing the extra room needed for tight bends. Brass construction handles normal loop pressures without deformation.

Powder-coated finish resists wear

The SX powder coating gives a durable UV-red surface that resists coolant staining and minor abrasion during assembly. Brass threads with a 5mm engagement depth seal reliably under typical operating temperatures. No moving seals contact the fluid, so noise and thermal performance are dictated by the rest of the loop.

Prednosti

  • 360° rotary lets you aim any direction
  • 20 mm extension clears tight component spacing
  • 90° elbow redirects tubing runs instantly
  • G1/4 brass threads ensure leak-free seal
  • UV red powder coat glows under UV light

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the G1/4 threads on this 90° rotary elbow mate with my existing G1/4 blocks and radiators?

Yes, both ends use standard G1/4 threads so the fitting connects directly to any G1/4 port on blocks, radiators or reservoirs.

How can I verify the 360° rotary joint moves freely after installation?

After tightening, gently rotate the female end through a full 360° turn; it should spin smoothly without binding or leaking.

Does the package include any O-rings or sealing washers, or must I buy them separately?

The box contains one male-to-female 90° rotary 20mm extension elbow; no extra O-rings or washers are supplied.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.