Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Satin black 90-degree rotary G1/4 elbow with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Satin Black

SKU CH-CBG2-67TR6

A G1/4 rotary elbow fitting with 20mm extension and 360-degree adjustment for custom liquid-cooling loops

  • TypeFittings

Option Satin Black

Zobraziť ďalších 9 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

20mm Rotary Extension for Custom Loops

This G1/4 90-degree rotary elbow extends a fitting by 20mm while allowing 360-degree orientation. It suits builders who need to route tubing around tight clearances or awkward component layouts in a custom liquid-cooling loop. The male-to-female thread connects directly to existing ports without extra adapters.

Installation Notes and Common Pitfalls

Hand-tighten the male thread into the component port, then rotate the elbow to the desired angle before securing the tubing fitting onto the female end. Over-tightening can damage the brass threads or the satin powder-coated finish. The rotary joint is not designed to support heavy tubing runs without additional brackets.

Compatibility Checks Before Ordering

Verify that every component in your loop uses G1/4 threads and that a 43mm total height and 20mm installed base height fit within your case clearance. Ensure the 90-degree bend direction matches your planned tubing path, as the rotary function only adjusts rotation, not the elbow angle itself.

Prednosti

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How can I verify the 90-degree rotary elbow is seated correctly after installation?

Check that the G1/4 male thread engages fully to its 5 mm depth, the installed base height measures 20 mm, and the rotary joint spins freely through 360 degrees without binding.

What comes in the box and do I need any extra seals or tools?

The package includes one Male to Female G1/4 90 Degree Rotary 20mm Extension Elbow Fitting with its SX powder-coated brass body; no additional O-rings or tools are supplied.

Which version should I choose if I need the 20 mm extension height in a satin black finish?

This single SKU provides the 20 mm installed base height, 43 mm total height, G1/4 threading and satin black SX coating — no alternative lengths or colours are offered for this model.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.