نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Satin black 90-degree rotary G1/4 elbow with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Satin Black

SKU CH-CBG2-67TR6

A G1/4 rotary elbow fitting with 20mm extension and 360-degree adjustment for custom liquid-cooling loops

  • TypeFittings

Option Satin Black

عرض 9 تكوينات إضافية

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

20mm Rotary Extension for Custom Loops

This G1/4 90-degree rotary elbow extends a fitting by 20mm while allowing 360-degree orientation. It suits builders who need to route tubing around tight clearances or awkward component layouts in a custom liquid-cooling loop. The male-to-female thread connects directly to existing ports without extra adapters.

Installation Notes and Common Pitfalls

Hand-tighten the male thread into the component port, then rotate the elbow to the desired angle before securing the tubing fitting onto the female end. Over-tightening can damage the brass threads or the satin powder-coated finish. The rotary joint is not designed to support heavy tubing runs without additional brackets.

Compatibility Checks Before Ordering

Verify that every component in your loop uses G1/4 threads and that a 43mm total height and 20mm installed base height fit within your case clearance. Ensure the 90-degree bend direction matches your planned tubing path, as the rotary function only adjusts rotation, not the elbow angle itself.

أبرز المميزات

  • Rotary joint enables 360° positioning for precise tubing alignment
  • 90° elbow redirects flow instantly around tight component clearances
  • 20mm extension adds installed height to clear obstacles cleanly
  • Satin black SX powder coat resists wear and matches dark builds
  • Solid brass construction with G1/4 threads ensures leak-free sealing

المواصفات

TypeFittings

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How can I verify the 90-degree rotary elbow is seated correctly after installation?

Check that the G1/4 male thread engages fully to its 5 mm depth, the installed base height measures 20 mm, and the rotary joint spins freely through 360 degrees without binding.

What comes in the box and do I need any extra seals or tools?

The package includes one Male to Female G1/4 90 Degree Rotary 20mm Extension Elbow Fitting with its SX powder-coated brass body; no additional O-rings or tools are supplied.

Which version should I choose if I need the 20 mm extension height in a satin black finish?

This single SKU provides the 20 mm installed base height, 43 mm total height, G1/4 threading and satin black SX coating — no alternative lengths or colours are offered for this model.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.