Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Brass G1/4 90-degree rotary elbow fitting with 20mm extension UV red powder coat

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow UV Red

SKU CH-T6HZ-JJBWC

A G1/4 rotary elbow fitting adds 20mm of clearance and turns tubing 90 degrees with 360-degree adjustment

  • TypeFittings

Option UV Red

Visa 9 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

  • 360° rotary lets you aim any direction
  • 20 mm extension clears tight component spacing
  • 90° elbow redirects tubing runs instantly
  • G1/4 brass threads ensure leak-free seal
  • UV red powder coat glows under UV light

Loop redirection made simple

The PrimoChill G1/4 90° rotary elbow fitting lets custom-loop builders change tubing direction by ninety degrees without strain. Its male-to-female G1/4 threads install directly into standard water-blocks, radiators or reservoirs. The 360-degree rotary base allows the outlet to be aimed precisely where the run needs to go.

Twenty-millimetre extension for clearance

The 20mm installed base height adds a short standoff that clears tall VRM heatsinks, bulky RAM modules or adjacent fittings. Total assembled height reaches 43mm, so the elbow stays compact while providing the extra room needed for tight bends. Brass construction handles normal loop pressures without deformation.

Powder-coated finish resists wear

The SX powder coating gives a durable UV-red surface that resists coolant staining and minor abrasion during assembly. Brass threads with a 5mm engagement depth seal reliably under typical operating temperatures. No moving seals contact the fluid, so noise and thermal performance are dictated by the rest of the loop.

I korthet

  • 360° rotary lets you aim any direction
  • 20 mm extension clears tight component spacing
  • 90° elbow redirects tubing runs instantly
  • G1/4 brass threads ensure leak-free seal
  • UV red powder coat glows under UV light

Specifikationer

TypeFittings

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the G1/4 threads on this 90° rotary elbow mate with my existing G1/4 blocks and radiators?

Yes, both ends use standard G1/4 threads so the fitting connects directly to any G1/4 port on blocks, radiators or reservoirs.

How can I verify the 360° rotary joint moves freely after installation?

After tightening, gently rotate the female end through a full 360° turn; it should spin smoothly without binding or leaking.

Does the package include any O-rings or sealing washers, or must I buy them separately?

The box contains one male-to-female 90° rotary 20mm extension elbow; no extra O-rings or washers are supplied.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.