PrimoChill Dual Male G1/4 Straight Coupler SX Sky Blue diy cooling
- Fittings
PrimoChill
A G 1/4in male-to-female extension coupler adds 20 mm of clearance between water-cooling fittings
Option UV Orange
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
The PrimoChill SX extension coupler adds 20mm of thread height between any two G 1/4in fittings. It is designed for custom-loop builders who need extra clearance around CPU blocks, radiators or tight component spacing.
The coupler provides a male and a female G 1/4in thread, increasing overall stack height by 20mm without thread engagement and 25mm with threads engaged. This headroom resolves interference between adjacent fittings but does not replace a longer rotary adapter when greater offset is required.
The body is machined from coated brass with a pre-installed O-ring on the male side for a secure seal. Brass conducts heat well and resists corrosion in standard coolant loops, adding minimal thermal load and no moving parts that could generate noise.
| Type | CPU Block |
|---|
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, it has one male and one female G 1/4in thread so it connects directly to any standard G 1/4in fitting.
Measure from the female thread face to the male thread tip; it should read 25 mm when fully seated.
Yes, the package contains one 20 mm SX extension coupler with an O-ring already fitted to the male thread.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?