Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Brass G 1/4in male-female extension coupler, 20mm body, coated finish, knurled grip

PrimoChill

PrimoChill G 1/4in 20mm SX Extension Coupler

SKU CH-T8QS-6RMZE

A G 1/4in male-to-female extension coupler adds 20 mm of clearance between water-cooling fittings

  • TypeCPU Block

Option UV Orange

Sjá 9 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Male-to-female G 1/4in thread extends fittings for clearance
  • 20 mm body length adds reach without bulk
  • 25 mm overall height including threads fits tight loops
  • Coated brass construction resists corrosion in coolant
  • Pre-installed O-ring on male side seals on assembly

G 1/4in Extension Coupler

The PrimoChill SX extension coupler adds 20mm of thread height between any two G 1/4in fittings. It is designed for custom-loop builders who need extra clearance around CPU blocks, radiators or tight component spacing.

20mm Added Height

The coupler provides a male and a female G 1/4in thread, increasing overall stack height by 20mm without thread engagement and 25mm with threads engaged. This headroom resolves interference between adjacent fittings but does not replace a longer rotary adapter when greater offset is required.

Coated Brass Construction

The body is machined from coated brass with a pre-installed O-ring on the male side for a secure seal. Brass conducts heat well and resists corrosion in standard coolant loops, adding minimal thermal load and no moving parts that could generate noise.

Helstu kostir

  • Male-to-female G 1/4in thread extends fittings for clearance
  • 20 mm body length adds reach without bulk
  • 25 mm overall height including threads fits tight loops
  • Coated brass construction resists corrosion in coolant
  • Pre-installed O-ring on male side seals on assembly

Tæknilýsing

TypeCPU Block

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this 20 mm extension coupler thread onto my existing G 1/4in fittings without adapters?

Yes, it has one male and one female G 1/4in thread so it connects directly to any standard G 1/4in fitting.

How can I confirm the 25 mm installed height is correct once the coupler is in my loop?

Measure from the female thread face to the male thread tip; it should read 25 mm when fully seated.

Does the box include the 20 mm coupler and the pre-installed O-ring on the male side only?

Yes, the package contains one 20 mm SX extension coupler with an O-ring already fitted to the male thread.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.