暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Brass G 1/4in male-female extension coupler, 20mm body, coated finish, knurled grip

PrimoChill

PrimoChill G 1/4in 20mm SX Extension Coupler

SKU CH-T8QS-6RMZE

A G 1/4in male-to-female extension coupler adds 20 mm of clearance between water-cooling fittings

  • TypeCPU Block

Option UV Orange

他に 9点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Male-to-female G 1/4in thread extends fittings for clearance
  • 20 mm body length adds reach without bulk
  • 25 mm overall height including threads fits tight loops
  • Coated brass construction resists corrosion in coolant
  • Pre-installed O-ring on male side seals on assembly

G 1/4in Extension Coupler

The PrimoChill SX extension coupler adds 20mm of thread height between any two G 1/4in fittings. It is designed for custom-loop builders who need extra clearance around CPU blocks, radiators or tight component spacing.

20mm Added Height

The coupler provides a male and a female G 1/4in thread, increasing overall stack height by 20mm without thread engagement and 25mm with threads engaged. This headroom resolves interference between adjacent fittings but does not replace a longer rotary adapter when greater offset is required.

Coated Brass Construction

The body is machined from coated brass with a pre-installed O-ring on the male side for a secure seal. Brass conducts heat well and resists corrosion in standard coolant loops, adding minimal thermal load and no moving parts that could generate noise.

特長

  • Male-to-female G 1/4in thread extends fittings for clearance
  • 20 mm body length adds reach without bulk
  • 25 mm overall height including threads fits tight loops
  • Coated brass construction resists corrosion in coolant
  • Pre-installed O-ring on male side seals on assembly

仕様

TypeCPU Block

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 20 mm extension coupler thread onto my existing G 1/4in fittings without adapters?

Yes, it has one male and one female G 1/4in thread so it connects directly to any standard G 1/4in fitting.

How can I confirm the 25 mm installed height is correct once the coupler is in my loop?

Measure from the female thread face to the male thread tip; it should read 25 mm when fully seated.

Does the box include the 20 mm coupler and the pre-installed O-ring on the male side only?

Yes, the package contains one 20 mm SX extension coupler with an O-ring already fitted to the male thread.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。