Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Brass G 1/4in male-female extension coupler, 20mm body, coated finish, knurled grip

PrimoChill

PrimoChill G 1/4in 20mm SX Extension Coupler

SKU CH-T8QS-6RMZE

A G 1/4in male-to-female extension coupler adds 20 mm of clearance between water-cooling fittings

  • TypeCPU Block

Option UV Orange

Zobrazit dalších 9 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Male-to-female G 1/4in thread extends fittings for clearance
  • 20 mm body length adds reach without bulk
  • 25 mm overall height including threads fits tight loops
  • Coated brass construction resists corrosion in coolant
  • Pre-installed O-ring on male side seals on assembly

G 1/4in Extension Coupler

The PrimoChill SX extension coupler adds 20mm of thread height between any two G 1/4in fittings. It is designed for custom-loop builders who need extra clearance around CPU blocks, radiators or tight component spacing.

20mm Added Height

The coupler provides a male and a female G 1/4in thread, increasing overall stack height by 20mm without thread engagement and 25mm with threads engaged. This headroom resolves interference between adjacent fittings but does not replace a longer rotary adapter when greater offset is required.

Coated Brass Construction

The body is machined from coated brass with a pre-installed O-ring on the male side for a secure seal. Brass conducts heat well and resists corrosion in standard coolant loops, adding minimal thermal load and no moving parts that could generate noise.

Přednosti

  • Male-to-female G 1/4in thread extends fittings for clearance
  • 20 mm body length adds reach without bulk
  • 25 mm overall height including threads fits tight loops
  • Coated brass construction resists corrosion in coolant
  • Pre-installed O-ring on male side seals on assembly

Specifikace

TypeCPU Block

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this 20 mm extension coupler thread onto my existing G 1/4in fittings without adapters?

Yes, it has one male and one female G 1/4in thread so it connects directly to any standard G 1/4in fitting.

How can I confirm the 25 mm installed height is correct once the coupler is in my loop?

Measure from the female thread face to the male thread tip; it should read 25 mm when fully seated.

Does the box include the 20 mm coupler and the pre-installed O-ring on the male side only?

Yes, the package contains one 20 mm SX extension coupler with an O-ring already fitted to the male thread.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.