Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
White brass G1/4 90-degree rotary elbow fitting with 20mm extension and 360-degree rotation

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Sky White

SKU CH-3M1H-4SFA7

A G1/4 rotary 90-degree elbow with 20mm extension and 360-degree adjustment for tight tubing runs

  • TypeFittings

Option Sky White

Zobrazit dalších 9 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 360-degree rotary lets you aim the connection in any direction
  • 90-degree elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance for components in the way
  • 43 mm total height fits low-profile builds
  • Brass construction with SX powder-coated Sky White finish

G1/4 90° Rotary Extension Elbow

This PrimoChill fitting is a male-to-female G1/4 adapter designed for custom liquid-cooling loops. Its 90-degree elbow redirects tubing runs away from components, while the 20mm extension adds clearance where space is tight. The 360-degree rotary action lets you orient the outlet in any direction after installation. A Sky White SX powder-coated finish matches themed builds.

Builders routing tubing in confined spaces

The fitting suits builders who need an immediate right-angle turn with adjustable rotation and a small height gain. It works with standard G1/4 threaded components in single-loop configurations. The design does not address loops that require straight-through couplers, multi-port distribution blocks, or larger thread sizes such as G3/8. Buyers needing quick-disconnect or valve functions should look elsewhere.

Check thread compatibility and clearance

Verify that every component in the loop uses G1/4 threads before ordering. Confirm the 43mm total height and 20mm installed base height fit within your case layout without fouling nearby parts. Ensure the 5mm thread depth matches the port depth on your blocks, radiators, or reservoirs. Plan the rotary orientation so tubing runs remain kink-free after final positioning.

Přednosti

  • 360-degree rotary lets you aim the connection in any direction
  • 90-degree elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance for components in the way
  • 43 mm total height fits low-profile builds
  • Brass construction with SX powder-coated Sky White finish

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Which thread size must my existing block or radiator have so this G1/4 elbow can screw in?

Both the male and female threads are G1/4, so the component you are connecting to must also use a G1/4 port.

Will the 360-degree rotary base let me align the 90-degree bend without stressing rigid tubing runs?

Yes, the rotary joint spins freely through 360 degrees, letting you orient the 90-degree elbow precisely before tightening.

After installation, how can I confirm the 20mm extension and 43mm total height give the clearance I needed?

Measure from the port face to the centre of the outlet; it should read 20 mm of added reach and 43 mm overall height.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.