Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
PrimoChill Candy Purple 90 degree rotary G1/4 fitting 20mm extension

PrimoChill

PrimoChill Male to Female G1/4 90° Rotary 20mm Extension Elbow Fitting Candy Purple DIY Cooling

SKU CH-758K-A5ZCG

G1/4 rotary 90° elbow with 20 mm extension and 360° swivel for tight-loop routing

  • TypeFittings

Option Candy Purple

Zobrazit dalších 9 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Rotary joint lets you aim tubing 360° for tight builds
  • 90° elbow redirects flow instantly around cramped components
  • 20 mm extension clears obstacles without extra fittings
  • 43 mm total height keeps loop profile low
  • SX powder-coated Candy Purple finish resists corrosion and matches theme

PrimoChill G1/4 90° Rotary Extension Fitting

This Candy Purple elbow fitting connects a male G1/4 thread to a female G1/4 port at a right angle. It is built for custom liquid-cooling loops where space is tight and tubing must turn sharply. The 360-degree rotary base lets you orient the outlet in any direction before tightening. The 20 mm extension adds clearance around crowded components.

20 mm extension and 90° turn for tight routing

The 20 mm installed base height moves the connection point away from the block or radiator port. This clears VRM heatsinks, motherboard shrouds or adjacent fittings that would otherwise block a straight coupler. The 90-degree bend handles sharp direction changes without kinking tubing. Total height reaches 43 mm, so very shallow builds may still find it too tall.

Brass body with powder-coated finish

The brass construction resists corrosion in mixed-metal loops when proper coolant is used. A durable SX powder coat provides the Candy Purple colour and protects the surface from minor scratches during installation. The rotary joint uses an internal O-ring seal that must be lubricated before assembly. No additional adapters or tools are included in the package.

Přednosti

  • Rotary joint lets you aim tubing 360° for tight builds
  • 90° elbow redirects flow instantly around cramped components
  • 20 mm extension clears obstacles without extra fittings
  • 43 mm total height keeps loop profile low
  • SX powder-coated Candy Purple finish resists corrosion and matches theme

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 20 mm extension clear tall VRM heatsinks on an older motherboard?

The 20 mm installed base height and 43 mm total height move the tubing run further from the board, giving extra clearance for tall heatsinks.

How can I verify the 360° rotary joint moves freely after installation?

With the loop depressurised, gently rotate the female end through a full 360° turn; it should move smoothly without binding.

Does the box include any extra O-rings or compression rings for G1/4 ports?

The package contains only the single Candy Purple elbow fitting; sealing rings for G1/4 threads must be sourced separately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.