Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
PrimoChill Candy Purple 90 degree rotary G1/4 fitting 20mm extension

PrimoChill

PrimoChill Male to Female G1/4 90° Rotary 20mm Extension Elbow Fitting Candy Purple DIY Cooling

SKU CH-758K-A5ZCG

G1/4 rotary 90° elbow with 20 mm extension and 360° swivel for tight-loop routing

  • TypeFittings

Option Candy Purple

Skatīt vēl 9 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Rotary joint lets you aim tubing 360° for tight builds
  • 90° elbow redirects flow instantly around cramped components
  • 20 mm extension clears obstacles without extra fittings
  • 43 mm total height keeps loop profile low
  • SX powder-coated Candy Purple finish resists corrosion and matches theme

PrimoChill G1/4 90° Rotary Extension Fitting

This Candy Purple elbow fitting connects a male G1/4 thread to a female G1/4 port at a right angle. It is built for custom liquid-cooling loops where space is tight and tubing must turn sharply. The 360-degree rotary base lets you orient the outlet in any direction before tightening. The 20 mm extension adds clearance around crowded components.

20 mm extension and 90° turn for tight routing

The 20 mm installed base height moves the connection point away from the block or radiator port. This clears VRM heatsinks, motherboard shrouds or adjacent fittings that would otherwise block a straight coupler. The 90-degree bend handles sharp direction changes without kinking tubing. Total height reaches 43 mm, so very shallow builds may still find it too tall.

Brass body with powder-coated finish

The brass construction resists corrosion in mixed-metal loops when proper coolant is used. A durable SX powder coat provides the Candy Purple colour and protects the surface from minor scratches during installation. The rotary joint uses an internal O-ring seal that must be lubricated before assembly. No additional adapters or tools are included in the package.

Priekšrocības

  • Rotary joint lets you aim tubing 360° for tight builds
  • 90° elbow redirects flow instantly around cramped components
  • 20 mm extension clears obstacles without extra fittings
  • 43 mm total height keeps loop profile low
  • SX powder-coated Candy Purple finish resists corrosion and matches theme

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 20 mm extension clear tall VRM heatsinks on an older motherboard?

The 20 mm installed base height and 43 mm total height move the tubing run further from the board, giving extra clearance for tall heatsinks.

How can I verify the 360° rotary joint moves freely after installation?

With the loop depressurised, gently rotate the female end through a full 360° turn; it should move smoothly without binding.

Does the box include any extra O-rings or compression rings for G1/4 ports?

The package contains only the single Candy Purple elbow fitting; sealing rings for G1/4 threads must be sourced separately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.