Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Brass G1/4 90-degree rotary elbow fitting with 20mm extension, Toxic Candy powder-coated finish

PrimoChill

PrimoChill Male to Female G1/4 90 Degree Rotary 20mm Extension Elbow Fitting Toxic Candy diy cooling

SKU CH-V97C-T2AJN

G1/4 rotary elbow fitting redirects tubing 90 degrees with 20mm extension and 360-degree adjustment

  • TypeFittings

Option Toxic Candy

Skatīt vēl 9 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • 360-degree rotary lets you aim the port in any direction
  • 90-degree elbow redirects tubing runs around tight component layouts
  • 20 mm installed base height adds clearance for crowded builds
  • 43 mm total height fits low-profile loops without obstruction
  • Brass construction with SX powder-coated finish resists corrosion in custom loops

Loop Redirection Solution

The PrimoChill Male to Female G1/4 90 Degree Rotary 20mm Extension Elbow Fitting is a DIY cooling component designed for custom liquid loops. It allows builders to change tubing direction quickly at unconventional angles. The rotary function enables the connection to be aimed in any desired direction 90 degrees from the mount. This fits systems needing tight spatial management around components.

G1/4 Thread Compatibility

The fitting uses a standard G1/4 thread for integration into existing water-cooling loops. Brass construction provides durability for continuous coolant contact. The installed base height measures 20mm with a thread depth of 5mm. Total height reaches 43mm when fully seated in the port.

Rotary Clearance And Finish

The 360 degree rotary mechanism allows precise alignment without stressing tubing runs. A 20mm extension creates additional clearance around obstructing hardware. The SX powder coated finish in Toxic Candy resists corrosion and adds visual accent. No active cooling or power draw is involved with this passive fitting.

Priekšrocības

  • 360-degree rotary lets you aim the port in any direction
  • 90-degree elbow redirects tubing runs around tight component layouts
  • 20 mm installed base height adds clearance for crowded builds
  • 43 mm total height fits low-profile loops without obstruction
  • Brass construction with SX powder-coated finish resists corrosion in custom loops

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much extra height does the 20 mm extension add once the fitting is installed in the loop?

The installed base height is 20 mm, so the extension raises the connection point by that amount while keeping total height at 43 mm.

What thread standard does the G1/4 rotary fitting use and what does it limit?

It uses standard G1/4 threads with a 5 mm thread depth, capping compatibility to components that share the same thread pitch and depth.

What clearance is needed to fit the 43 mm tall elbow in a tight build?

You need at least 43 mm of vertical space from the mounting surface, plus room for the 360-degree rotary joint to turn freely.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.