Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Brass G 1/4 inch male-female extension coupler, 15mm body, coated finish

PrimoChill

PrimoChill Male to Female G 1/4in 15mm SX Extension Coupler diy cooling

SKU CH-6XWK-FGNCQ

A 15mm coated-brass G 1/4in male-to-female extension coupler adds clearance for custom-loop fittings

  • TypeCPU Block

Option UV Green

Zobrazit dalších 9 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Adds 15 mm clearance with a 20 mm overall height
  • G 1/4 in male-to-female threads fit standard water-cooling loops
  • Coated brass construction resists corrosion in liquid-cooling systems
  • Pre-installed O-ring on male side ensures a leak-tight seal
  • Compact SX coupler solves tight-space fitting conflicts

Extension coupler for custom loops

The PrimoChill Male to Female G 1/4in 15mm SX Extension Coupler adds length to a water-cooling fitting so that tubing or blocks can clear nearby components. It is intended for DIY builders assembling a custom liquid-cooling circuit who need a short spacer between two G 1/4in ports. The coated brass body resists corrosion inside a sealed loop.

Thread and clearance check before ordering

Verify that both mating ports use G 1/4in threads; the coupler provides one male and one female end. Measure the available gap to confirm the 15mm body height plus the 20mm overall height with threads will fit without stressing adjacent fittings. Ensure the installed O-ring on the male side seats cleanly to prevent leaks.

Behaviour under sustained loop pressure

The coated brass construction maintains dimensional stability when the loop runs at typical operating temperatures and pressures for extended periods. The fixed O-ring seal does not rely on periodic retightening, so joint integrity remains consistent during continuous circulation. The coupler adds no moving parts, so flow resistance and acoustic signature stay constant over the life of the build.

Přednosti

  • Adds 15 mm clearance with a 20 mm overall height
  • G 1/4 in male-to-female threads fit standard water-cooling loops
  • Coated brass construction resists corrosion in liquid-cooling systems
  • Pre-installed O-ring on male side ensures a leak-tight seal
  • Compact SX coupler solves tight-space fitting conflicts

Specifikace

TypeCPU Block

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What comes in the package and is an extra O-ring needed?

The box contains one 15 mm SX extension coupler with an O-ring already installed on the male G 1/4 in. thread. No additional seal is required.

Which height version should I pick for a tight clearance build?

The coupler adds 15 mm without threads or 20 mm including the threads, so choose based on the exact gap you need to bridge.

How much extra length does the coated brass coupler add to a G 1/4 in. loop?

It extends the connection by 15 mm (20 mm with threads engaged), giving the clearance needed for tight routing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.