暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Brass G 1/4 inch male-female extension coupler, 15mm body, coated finish

PrimoChill

PrimoChill Male to Female G 1/4in 15mm SX Extension Coupler diy cooling

SKU CH-6XWK-FGNCQ

A 15mm coated-brass G 1/4in male-to-female extension coupler adds clearance for custom-loop fittings

  • TypeCPU Block

Option UV Green

他に 9点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Adds 15 mm clearance with a 20 mm overall height
  • G 1/4 in male-to-female threads fit standard water-cooling loops
  • Coated brass construction resists corrosion in liquid-cooling systems
  • Pre-installed O-ring on male side ensures a leak-tight seal
  • Compact SX coupler solves tight-space fitting conflicts

Extension coupler for custom loops

The PrimoChill Male to Female G 1/4in 15mm SX Extension Coupler adds length to a water-cooling fitting so that tubing or blocks can clear nearby components. It is intended for DIY builders assembling a custom liquid-cooling circuit who need a short spacer between two G 1/4in ports. The coated brass body resists corrosion inside a sealed loop.

Thread and clearance check before ordering

Verify that both mating ports use G 1/4in threads; the coupler provides one male and one female end. Measure the available gap to confirm the 15mm body height plus the 20mm overall height with threads will fit without stressing adjacent fittings. Ensure the installed O-ring on the male side seats cleanly to prevent leaks.

Behaviour under sustained loop pressure

The coated brass construction maintains dimensional stability when the loop runs at typical operating temperatures and pressures for extended periods. The fixed O-ring seal does not rely on periodic retightening, so joint integrity remains consistent during continuous circulation. The coupler adds no moving parts, so flow resistance and acoustic signature stay constant over the life of the build.

特長

  • Adds 15 mm clearance with a 20 mm overall height
  • G 1/4 in male-to-female threads fit standard water-cooling loops
  • Coated brass construction resists corrosion in liquid-cooling systems
  • Pre-installed O-ring on male side ensures a leak-tight seal
  • Compact SX coupler solves tight-space fitting conflicts

仕様

TypeCPU Block

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the package and is an extra O-ring needed?

The box contains one 15 mm SX extension coupler with an O-ring already installed on the male G 1/4 in. thread. No additional seal is required.

Which height version should I pick for a tight clearance build?

The coupler adds 15 mm without threads or 20 mm including the threads, so choose based on the exact gap you need to bridge.

How much extra length does the coated brass coupler add to a G 1/4 in. loop?

It extends the connection by 15 mm (20 mm with threads engaged), giving the clearance needed for tight routing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。